Sanyo DVW-5000 DVD Player/VCR - Answered Questions & Fixed issues
After power outage remote not working.
Hi, this is a bit basic, try turning of for about 1/2 hour, to enable to discharge, then try again.
( I have used this on industrial installations, with far to complex computers stuff inside, and that mainly works)
I have a DVD/VHS recorder and lost the remote for
We lost our original remote also. We got a generic remote. It came w/instructions & a list of brands/devices that it will work with. I found Sanyo on the list & entered the code associated w/Sanyo into the new remote & presto. We were using our DVW 5000 again.
Sany dvd player manual
HelloSend your Email address to me by Fixya comment box. I've the user manaul to your device. I can't send it to you by this window as it does not allow me to upload PDF files by it. If you send me your email ID, I'll send a copy of it to you by return mail. OK.
My player eats the vcr
It is most likely that the pinch roller will need replacing. Once these become glazed (shiny) the tape slips over them, resulting in 'chewing' as the edges of the tape ride up or down the capstan shaft and into the top or base 'rabbit' of the exit guide nearby. Replace the roller, clean the tape path (capstan, guides, heads, take up arm, etc., *gently of course*) with alcohol solution or methylated spirit - do not use q-tips to clean the drum.
VCR should be OK after that. No further repair should be necessary here, and rubber pinch rollers for VCRs are not expensive to order as a generic part for this model.
Lost my manual I need
here is a basic diagram of cable connection from a cable box to a vcr and to the tv.
I had a new high
Hello,
was the VHS recording before the new high definition TV was installed? Or are you trying to say that the cable company has tempered with the settings of the VHS?
Probably, the cable company, has removed the cable for the player. Check the back of the player and let me know if the cable between the player and the TV are intact.
The above needs to be verified for accurate solution.
I look forward to your reply.
Bye for now.
How do I get the VCR to play on the tv? It's a
This maybe too simplistic but are you sure you have the right command buttons toggled try to set the player to VCR and not dvd.
Set the player to VCR with a tape in it and press play. I hope this works for you
The door of my dvd player will not open. It sound
This sounds like a problem with the mechanism of your player,it is probably stuck.
What you should do is to open up the player and try to open the door with your hand by pulling it,check to see what is stopping it from opening and clear the object stopping the door from opening automatically
Please note that it might just require oiling the door wheel to make the door open and close automatically.
Have SANYO VCR/DVD Model E175216 and can't locate
Hi, if ithere is no button on the front of the unit or on the remote, then simply setting the unit to standby with either power button should make the unit enter the timer record mode. (This will be indicated with TIMER or a small red clock symbol in the display providing all the conditions have ben met. i..e clock & timer correctly set, tape in machine, etc)
The eject function on the
Usually this means that the DVD tray has dust and dirt build up on the underside of the tray or the belt maybe slipping.
Copy and paste this link in your web browser for a detailed approach of how to fix it yourself.
http://www.fixitclub.com/Electronics/DVD_Player.shtml?page=3
Not finding what you are looking for?