20 Most Recent Korg M50 61-Key Music Workstation Keyboard - M5061 - Page 5 Questions & Answers

For those with Korg PA500 problems I just uploaded the manual. Perhaps that will sort your problems. Have Fun.

Probably your best bet is to use a sound editor/library. Move the sounds onto your computer, then into the librarian editor, then from there through midi into your keyboard.

As I recall, Here I Go Again uses a Roland D-50 sound called "Fantasia"

Hold ENTER and 7, then Power on.

hello sir, THIS IS SOFT RESET; FACTORY MUTE PARAMETERS WILL BE LOADED INTO ... ART, MULTIVERB LTX, No factory reset, remove battery for more than 5 hours. .... KORG, N364, HOLD ENTER AND 7, THEN POWER ON. KORG .... ROLAND, D-550, TUNE/FUNCTION AND MIDI DATA INIT: HOLD PATCH BANK 2, thanks from: SHAAD GONDEKAR

if it's the old analog version, there should be a tuning knob in the group of controls on the left hand side by the drawbars.

It is inside the unit. You will need to open it up. The battery is flat like a quarter. Sometimes it is inserted under a cover. Look carefully, you will find it.

try resetting it to its factory setting,

Your best answer would come from Korg. Itself. Here's the link- http://www.korg.com/us/support/contact

hot connections indicate a short or bad connection ( like an arc welder ) loose wires or solder dry joint or broken wires creating a high resistance and heat in this area

You have bad contacts on some of your keys. The keyboard has to be taken apart, and electronic contact cleaner has to be sprayed into the contacts to clean them. Press the keys repeatedly to spread the cleaner into the contacts. If the contacts are too badly pitted/rusted from water or other liquid damage, cleaning will not help.

Korg PA 600 Quick Manual Selecting And Saving Performances

The contacts are probably dirty or bent. The keyboard is relatively easy to remove if you have any experience.