Sylvania SDVD8732 Player - Page 4 - Answered Questions & Fixed issues

Failing power supply

Try a reset to this TV and check. There are two types of reset to TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/ Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done.

try manualslib.com

It's the fuse in the electric engine. You can bypass this fuse by cutting it off and then you just connect the two ends together, wrap with electrical tape. It'll work, that's what I did to mine. Works great again

Did you finalize the DVD before you removed it from the VCR/DVD recorder? Until a disc is finalized, it won't work on another device. If you left some space, try to finalize it now. Does the disc play when in that Sylvania unit? It is possible that the unit is faulty and didn't focus the laser properly for writing to the DVD. (If you actually tried to burn to a CD and not a DVD-R, then no data was written to the disc. There are slight differences to the laser settings for CDs and DVDs.) I hope this helps. Cindy Wells

Try contacting Curtis International Customer service at 800-968-9853 and request a user manual if French.

https://www.amazon.com/Charger-Portable-Player-Power-Adapter/dp/B07BGXFHKS

Consider using 'auto search' on Motorola. how ? Turn on your TV and point the remote at TV during setup 1. Press and hold SETUP until the LED blinks twice 2. Press the TV POWER key. 3. Aim the remote at your TV and press and hold down the OK key. 4. Release the key when the TV turns off and setup is complete.

consider using 'auto search' on Motorola. how ? Turn on your TV and point the remote at TV during setup 1. Press and hold SETUP until the LED blinks twice 2. Press the TV POWER key. 3. Aim the remote at your TV and press and hold down the OK key. 4. Release the key when the TV turns off and setup is complete.

Better late than never. The problem is that your TV is in the service mode. There are many ways this can happen. But, lets just get down to fixin this! With the original remote and the TV on. If the TV will not shut off, do this. Press the left cursor button on the remote, followed with pressing the right cursor. Power off the TV with remote, or press off button on TV. Secondly, your TV will power on and off. But you have flashing colors. Do this. With the original remote and TV on. Press the up cursor button, on the remote, followed with pressing the down cursor. Power off TV with remote, or press off power of TV. Thanks for asking me, Matt of Martins TV Repair.

Curtis International which made the Sylvania clock radio no longer has any support for its legacy electronics. ManualsLib has manuals for several Sylvania clock radio models here: https://www.manualslib.com/brand/sylvania/clock-radio.html . They have a link for the SCR1388B, https://www.manualslib.com/manual/944856/Sylvania.html . This document doesn't list the SCR1388B on the cover page. However, the two clock radios are probably similar enough that the manual will help you use your clock radio. If this manual doesn't provide enough details, please check some of the other manuals listed at the first link above. I hope this helps. ManualsLib does provide an option to get the manual as a PDF. See the Download button near the top of the page. You will need to go through some CAPTCHA checks to download the file as a PDF. Cindy Wells

Hi Elsie- If you do not have the remote, you can change inputs by doing the following: Changing inputs Inputs are selected by using a number of methods, depending on the model of your Sylvania TV. Switching inputs is usually accomplished by pressing the "Input Select" button on the remote. Each press will simply cycle through each available input on your TV. If no remote is available, the front panel has a button that matches the function on the remote. This button is located on the bottom-right side of the TV and doubles as the "Enter" button when accessing onscreen menus. Hope this helps.

You maybe able to get a region free code for your player from these WEB sites. Unlock DVD Players - Region Free Code www.dvdexploder.com/ www.download-info.com/dvd/index_new.htm

To keep it short, that is the way most tvs are wired nowadays, so you are out of luck. You are limited even on Bluetooth connections to only two headphone sets. There are some ways around it though if your tv sound output is going to a decent receiver with its own speakers.

Can I get the codes for a hisense smart tv plz

use the buttons on the TV set. Thats what they are there for. Also, you can buy a universal remote and program it for your TV.

only if they use the same system PAL (European) NTSC North American. UK uses PAL, Canada uses NTSC So to answer your question: No it will not work.

GO TO VIDEOHELP.COM in internet and follow the step for unlock the code and permite use the region that you want to use.God bless you

Go to this link http://www.ehow.com/how_6637829_set-sylvania-dvd-player-region.html How to Set Sylvania DVD Player to Region Free eHow

Does the front panel have menu, volume and channel buttons. Here's the manual: https://www.manualslib.com > Brands > SYLVANIA Manuals > CRT TV > SRT2027 It should tell you how to do it.