Top 20 Casio Privia Px330 Px-330 88 Key Digital Piano New - Page 8 Questions & Answers

PX 410r uses IDES 4.0 downloadable from http://www.casio-europe.com/euro/emi/specials/ides/downloads/ and not another version. I suggest you uninstall the Casio USB driver from Control Panel'system'device manager then Reboot the PC without the USB cable. Download latest USB driver from :- http://support.casio.com/en/support/download.php?cid=008&pid=20 64 or 32 bits versions are both available. Load driver first. Plug in the usb cable only when software tells you to do so. Uninstall Data manager if wrong version. Install IDES 4.0

Not currently available online. Perhaps get the closest Casio CTK571-CTK573 manual as a cross reference for the time being. http://support.casio.com/en/manual/manual.php?cid=008

Casio CDP has Auto Power Off: 30 minutes after last key operation, Auto Power Off can be disabled. Please read the manual. If it turns itself off while playing, I would try to buy a new AC Adapter to test. DC cable of AC adapters are often broken internally after much "bending".

https://dl.dropboxusercontent.com/u/7502291/keyboard-manuals/casio-ct-650_manual.pdf

http://www.ebay.com/itm/DC-9V-AC-Adapter-Casio-CTK-4000-CTK-558-CTK700-Keyboard-/221021599357

I assumed you mean a PX150. Here is a link to a manual for that but I found nothing for a privia 150. It looks here to me on page 19 that you choose track 1 or 2 which seems to be left or right and if you start new recording on one of them, it deletes what was there. http://www.fixya.com/answer/answerpageslideview.aspx?ctg=249&fml=0&brd=0&p=7&ctrl=mnf&thid=23710754

Available at:- http://www.scribd.com/doc/50651766/Casio-MT240-User-Manual

Appears to require a 12v dc adapter. I have found most generic adapters of sufficient capacity (meaning what is posted usually on keyboard i.e. 1amp or whatever) wired to proper polarity will work fine.

Casio CDP has Auto Power Off: 30 minutes after last key operation, Auto Power Off can be disabled. Please read the manual.

Hi, This and a lot of similar keyboards have gold flashed pads on the PCB and the keys press one or two rubber caps, with conductive pads in them, down. Clean the pads with isopropanol, (and nothing else) and it will be cured 99% of the time. If a few notes do not work, especially after heavy use, then the rubber caps can be replaced. Taking the keyboard apart is long winded because of the number of screws involved. The job its self is simple enough, but take note of the order things go in and where the screws go. Hope this helps, Chris.

Use only DINAMIC microphon (computer microphons are not dinamic- they are condenser-electret) with MONO jack. 1. Turn knob (beside "mic.in") "mic.volume" (T-7) full clockwise. 2. Press "MIXER" (C-7). 3. Press "<" (R-17) while is shown "MIXER PART>:EXT(M/I) 4. Set (check) Part [ ON] Volume: [80...127] ... .... N.Tresh [0] If after microphone disconection there is a noise from speakers - set PART [off] or N.Tresh [20] (or higher))

Screen Contrast is adjustable. Read Page E10 of User manual If may download English User manual fromhttp://support.casio.com/storage/en/manual/pdf/EN/008/WK200_500_EN.pdf

I think the assignable jack is for pedal assignable - Sustain, Soft, Sostenuto or Rhythm Start/Stop ONLY No, this model does not support Mic input for karaoke singing.

Depending on which model you have, the contacts aren't difficult to locate. If you have removed the keyboard bed (which I hope you have...and not ripped out the guts behind the piano! :) the sensors usually sit to the rear and uppermost. They may be covered by a thin plastic (don't remove the plastic tho)

Jeremy hiyou must open the piano and change the headphone jack

you need change the master volume potentiometer a10k

If it hasn\'t been dropped or bumped, check the adapter. Work backwards from the keyboard. It doesn\'t take much for the casio adapters to pack a sad. If there\'s an overload in your switchboard, it\'s usually the Casio that packs a sad...everything else is fine, microwave, tv, stereo - just not the casio. Their adapters are garbage and until recently - they\'ve just gotten better

Your keyboard only has a USB port. You need to buy a std USB printer cable (A-B). Download the drivers from Casio.com Instal the driver first and connect the cable when asked to. Once connected, the PC will have software MIDI-IN and MIDI-out for your LK94TV

Get it fixed under warranty. Many circuits may need to be replaced. My WK8000 with similar problem took a month - but all Free of Charge repaired under warranty.

At the rear normally.