Creative Labs MuVo Micro N200 MP3 Player - Answered Questions & Fixed issues
Tried turning it on. It says there is no music, but there is.
Maybe it's time for you to upgrade to a new mp3 player. I guess the regular one you have right now is probably old. If not old, try to see if you can get the manufacturer that owns the product to see if they can fix the issue. If they are not able to assist, then maybe you can troubleshoot it.
File system error
hi! all,
when i connect my muvo n200 256MB, it show h: is not accesible. The request could not be performed because of an I/O device. Please help what can be done. please reply
sibinkumar
Mumbai
Help!!!
It can also be caused by transferring DRM (Digital Rights Management)
encoded media files via the drag and drop method. It is recommended that
you use the drag and drop method to transfer audio files that are not encoded
with DRM. If in doubt, use either Creative MediaSource Organizer or Windows
Media Player to transfer your files.
To resolve this difficulty, we recommend that you format the player and
transfer the content again. You can also download and install the latest
firmware, and select the Format Data Area option during firmware update.
To format a MuVo player, connect it to a USB port on your PC. Open the Windows
Explorer, and locate the Removable Drive listing and right
click on it. Select Format, and choose FAT instead of FAT32 or NTFS. After
the formatting is complete, make sure that you stop your player before disconnecting
it from your PC (see above)
To update or reload the firmware for a MuVo player, select the model of
your player from below.
This firmware upgrade only works with Creative MuVo Micro N200 players.
Do not install this upgrade to other players.
You will lose all content in your player when you install the firmware.
Back up any audio or data files in your player to your computer before
upgrading the firmware.
Before installing the firmware, please complete the following procedures:
- Download the latest device driver if you have not installed any drivers
for your player. The file name is MStorage_PCDRV_LB_1_07_00_250.exe.
- Connect your player to your PC.
- Close all active applications (for example, Internet Explorer, Windows
Explorer, or Windows Media Player etc), as well as background applications
such as Norton anti-virus applications.
- Double click on the file MStorage_PCDRV_LB_1_07_00_250 to
install it. Follow the instructions on the screen.
To install the firmware for your player, follow the procedures below:
- Download the firmware update, MuVoN200_PCFW_LF_1_20_04.exe to
your hard drive.
- Connect your player to your PC if it is not already connected.
- Double click the firmware upgrade file.
- When prompted to set your player in Recovery mode, disconnect
your player from your PC.
- Remove the battery from the player, press and hold the Play button
while connecting the player to the USB port.
- Continue to hold the Play button for about 10 seconds after
your player is connected to the USB port.
- When the Find New Hardware dialog box appears on your PC screen,
release the Play button.
- If this is the first time a player is installed as Player Recovery
Device, Windows will find a Player Recovery Device (or USB Device),
and prompt you for drivers. Click on No , and select Do
not search. I will choose the driver to install. Windows will install
the necessary drivers automatically.
- Double click on the downloaded firmware again (MuVoN200_PCFW_LF_1_20_04.exe)
to update the player's firmware.
- During the firmware update process, make sure to check the box next
to Format Data Area under Download options.
Connecting to pc
Make sure you have media player 11
If you can, the best test is to try your player with another PC, to see if you still have the problem. This localises whether the problem is with the PC (most likely the USB) or the player. See the link below (search on "connection problems") for a lot more troubleshooting on this.
Download recovery tool off creative's website.
go to my computer > click on hardware tab >
click on device manager button > in the is next screen on the bottom should have>>universal serial bus controllers
(write these down just in case it cant find them)
right click on them and uninstall
reboot let windows reinstall them
Also told Microsoft hotfix causes this problem try uninstalling the last hotfix
If that doesn't fix it try the USB cable
Muvo v 100 mp3
This firmware upgrade only works with Creative MuVo Micro N200 players.
Do not install this upgrade to other players.
You will lose all content in your player when you install the firmware.
Back up any audio or data files in your player to your computer before
upgrading the firmware.
Before installing the firmware, please complete the following procedures:
- Download the latest device driver if you have not installed any drivers
for your player. The file name is MStorage_PCDRV_LB_1_07_00_250.exe.
- Connect your player to your PC.
- Close all active applications (for example, Internet Explorer, Windows
Explorer, or Windows Media Player etc), as well as background applications
such as Norton anti-virus applications.
- Double click on the file MStorage_PCDRV_LB_1_07_00_250 to
install it. Follow the instructions on the screen.
To install the firmware for your player, follow the procedures below:
- Download the firmware update, MuVoN200_PCFW_LF_1_20_04.exe to
your hard drive.
- Connect your player to your PC if it is not already connected.
- Double click the firmware upgrade file.
- When prompted to set your player in Recovery mode, disconnect
your player from your PC.
- Remove the battery from the player, press and hold the Play button
while connecting the player to the USB port.
- Continue to hold the Play button for about 10 seconds after
your player is connected to the USB port.
- When the Find New Hardware dialog box appears on your PC screen,
release the Play button.
- If this is the first time a player is installed as Player Recovery
Device, Windows will find a Player Recovery Device (or USB Device),
and prompt you for drivers. Click on No , and select Do
not search. I will choose the driver to install. Windows will install
the necessary drivers automatically.
- Double click on the downloaded firmware again (MuVoN200_PCFW_LF_1_20_04.exe)
to update the player's firmware.
- During the firmware update process, make sure to check the box next
to Format Data Area under Download options.
A problem with turning on . . .
This firmware upgrade only works with Creative MuVo Micro N200 players.
Do not install this upgrade to other players.
You will lose all content in your player when you install the firmware.
Back up any audio or data files in your player to your computer before
upgrading the firmware.
Before installing the firmware, please complete the following procedures:
- Download the latest device driver if you have not installed any drivers
for your player. The file name is MStorage_PCDRV_LB_1_07_00_250.exe.
- Connect your player to your PC.
- Close all active applications (for example, Internet Explorer, Windows
Explorer, or Windows Media Player etc), as well as background applications
such as Norton anti-virus applications.
- Double click on the file MStorage_PCDRV_LB_1_07_00_250 to
install it. Follow the instructions on the screen.
To install the firmware for your player, follow the procedures below:
- Download the firmware update, MuVoN200_PCFW_LF_1_20_04.exe to
your hard drive.
- Connect your player to your PC if it is not already connected.
- Double click the firmware upgrade file.
- When prompted to set your player in Recovery mode, disconnect
your player from your PC.
- Remove the battery from the player, press and hold the Play button
while connecting the player to the USB port.
- Continue to hold the Play button for about 10 seconds after
your player is connected to the USB port.
- When the Find New Hardware dialog box appears on your PC screen,
release the Play button.
- If this is the first time a player is installed as Player Recovery
Device, Windows will find a Player Recovery Device (or USB Device),
and prompt you for drivers. Click on No , and select Do
not search. I will choose the driver to install. Windows will install
the necessary drivers automatically.
- Double click on the downloaded firmware again (MuVoN200_PCFW_LF_1_20_04.exe)
to update the player's firmware.
- During the firmware update process, make sure to check the box next
to Format Data Area under Download options.
System error
This firmware upgrade only works with Creative MuVo Micro N200 players.
Do not install this upgrade to other players.
You will lose all content in your player when you install the firmware.
Back up any audio or data files in your player to your computer before
upgrading the firmware.
Before installing the firmware, please complete the following procedures:
- Download the latest device driver if you have not installed any drivers
for your player. The file name is MStorage_PCDRV_LB_1_07_00_250.exe.
- Connect your player to your PC.
- Close all active applications (for example, Internet Explorer, Windows
Explorer, or Windows Media Player etc), as well as background applications
such as Norton anti-virus applications.
- Double click on the file MStorage_PCDRV_LB_1_07_00_250 to
install it. Follow the instructions on the screen.
To install the firmware for your player, follow the procedures below:
- Download the firmware update, MuVoN200_PCFW_LF_1_20_04.exe to
your hard drive.
- Connect your player to your PC if it is not already connected.
- Double click the firmware upgrade file.
- When prompted to set your player in Recovery mode, disconnect
your player from your PC.
- Remove the battery from the player, press and hold the Play button
while connecting the player to the USB port.
- Continue to hold the Play button for about 10 seconds after
your player is connected to the USB port.
- When the Find New Hardware dialog box appears on your PC screen,
release the Play button.
- If this is the first time a player is installed as Player Recovery
Device, Windows will find a Player Recovery Device (or USB Device),
and prompt you for drivers. Click on No , and select Do
not search. I will choose the driver to install. Windows will install
the necessary drivers automatically.
- Double click on the downloaded firmware again (MuVoN200_PCFW_LF_1_20_04.exe)
to update the player's firmware.
- During the firmware update process, make sure to check the box next
to Format Data Area under Download options.
Cant use my mic
do you have the latest firmware and are you using new batties?
http://us.creative.com/support/downloads/welcome.asp?action=next
Error
Did you format it properly?
Usually MP3 Players are to be formatted with the FAT32 File System. This can be easily done on Windows.
Simply connect the Mp3 Player to your computer via the USB. Then Windows should be able to detect it just fine. Go to My Computer and right clock on the new device (that is the MP3 Player) and select "Format".
Format as FAT32 and try again.
PS: You may want to backup all data (if that is possible) before you attempt this Format thing.
MuVo N200 1 GB
look for a tiny pinhole and insert a pin while powered up to reset the device
Creative MuVo N200 512 MB MP3 Player
If you've tryed to leave out the batterys more then a day or so?? if not try it BUT if this dosent help it may be time to get a new mp3 . Sorry but there are no real user serviceable parts inside of these puppies. Good Luck
Hi, Is there a plug that will allow bulk printing
You can use this ONLINE tool from eBAY. ITS COMPLETELY FREESelling Manager is an online tool designed for medium-volume sellers to help
manage and track listings on eBay. Selling Manager is conveniently located in My
eBay. Use with Turbo Lister for a complete solution.
• Monitor active listings
• Generate bulk feedback and print invoices
• Print invoices and labels in bulk
Bulk Printing (Selling Manager Pro)
Selling Manager Pro subscribers can print as many as 200 invoices or shipping
labels at one time from the Sold View.
To print multiple invoices and shipping labels:
-
In the Sold View, check the box next to the listings that you want to print
invoices or shipping labels for and click the Print button.
To select all of your Sold items, check the box in the heading bar above
the list of sold items
-
From the Print page, select the printout you want, and click the Continue button.
-
In the pop-up window that appears, use the scroll bar to preview each of the
pages that will be printed.
-
Once you are satisfied with how the pages will look, click the Print button in the browser window.
-
If you need to edit information for a specific page, go the corresponding
sales record. When you are finished updating the sales record, save your
changes. Your changes will be reflected the next time you print.
This pro version is available for approx $5 per month
Barely see screen
If the brightness is all the way down, simply turn it up.
If not this indicates an issue with the device and you should take it to your local tech repair shop
My speakers stopped working after they were unplugged etc
Try the BLUE jack, then the GREEN jack. You won't hurt anything if you guess wrong. BTW, are the sub and speakers powered up? Pilot light showing they're on? Some speakers are powered by a USB port - any loose USB cables laying around?
My IC BT9843 is burnt I need an equivalent to replace it.any help please?
Try searching again using Google, using BT 9843, but when you look down the results ignore the two letters and see if you can find an IC which is the same numbers, even if it has different letters on the front. Those letters could be just the makers letters, with the device made by different makers.
6/15/2018 1:16:29 PM •
Creative Labs...
•
Answered
on Jun 15, 2018
•
1,594 views
Win 7 drivers for creative sbs a235 speaker
creative a 235 doesnot require any computer driver. Just plug into headphone jack and enjoy. If your headphone is working in the same jack and your speakers must also work. Use a working headphone to check the problem is with laptop or speakers.
Not finding what you are looking for?