Netopia 3347NWG-006 Router - Answered Questions & Fixed issues

Eh..some yes, mostly NO! I am a technician for the company that widely set up these type routers/switches/gateways and the simple problem is that most of these were used during installation by BellSouth which is now technically SBC Doing Business As; AT&T, DBA BellSouth Mississippi, Louisiana, Alabama,ETC. follow this link AT Drivers and Downloads and select your model of the Netopia 3000 series you have and click the firmware link. DO NOT RUN THIS FILE. IT IS A .BIN FILE TO BE USED IN THE ROUTER'S UPDATE FIRMWARE SECTION. Go back into the update firmware menu and instead of choosing the automatic or online feature *previously a BellSouth domain now converted to an AT&T ITservices domain which is why it can't find it) choose the browse or select file option and select the .bin file you saved and that should do it.

This one?http://www.netwood.net/support/manuals/Netopia-3347W-ENT_qsg.pdf

What is a "prone"? Maybe this will help: http://www.broadbandreports.com/forum/r24696308-Modem-How-to-Setup-Netopia-3347NWG006

Click on this WEB site to check if your computer is infected with the DNS changer.http://www.dns-ok.gov.au/

Honestly, no idea. If you don't have a manual with the MODEL you can try to look for the proper one, I got some links, maybe one is yours: http://www.netwood.net/support/manuals/Netopia-3347W-ENT_qsg.pdf http://www.netwood.net/support/manuals/Netopia-2247-62-User-Guide-US-EN.pdf http://videos.cctvcamerapros.com/pdf/netopia-router/Netopia-Router-Manual.pdf There are more.... Now, take note that WPS is too easy to hack. Read some about this issue: How to Hack Wi Fi Breaking WPS PIN to Get the Password with Bully And read more about theme...

1. Click the Expert Mode link near the left of the page. (it is not listed in the manual) 2.Click the Yes, enter expert mode button near the centre of the page. 3. The menu on the left should change. In this new menu, click Configure. 4. You should now see a new menu. In this new menu, click NAT. 5. Click the Define Custom Service button near the center of the page. 6.Put a dot into the Port Forwarding: Range of Ports radio button. 7. Click the Next button. Then set up the ports you want to forward. One Example s here O Port Forwarding the Netopia 3347W Router for Xbox One

Typically a label on the router will display the MAC

It Needs A Driver--If There Is None For Your Operating System, May Be Obsolete.

Hi You can fix this problem by entering 192.168.1.1 or your routers ip.then you can accsess your routers software and in the WLAN section you can change the password or reset. try looking under every section until you find the correct area which you can do things to the WLAN setting. Hope this worked :)

The password (a string of 26 letters and numbers) is usually situated on a sticker on the back of the box.

It all depends on the brand of your router, but mainly is to jump into the GUI with your admin password, look for DHCP options, static DHCP and save the MAC Address of the host with the desired IP.

Try this GENERAL ROUTERS RESETING

If you are a new user Create a New Account. then search your driver

SO YOU MUST KNOW THE PASSWORD OR NO?

MAKE AN ACCOUNT HERE ARRIS THEN LOOK FOR THE FIRMWARE.

"Try http://www.fixya.com/support/r11153882-general_routers_reseting"

try this website out they have just about every router out there listed Port forwarding the Netopia 2247NWG VGx router

win or rooter pass?

you can load it from cnet., for more networking accessories ,visit here., http://www.gizga.com/consumer-electronics

I presume that you mean "from a web site" that the web site is hosted somewhere out on the greater internet.... The problem that you are encountering is probably related to NAT (Network address translation). The "In" side of a router, is typically a "private network" there are pre-assigned number groups for these - a common one is in the 192.168.x.x range. Problem is that the "outside" of your Netopia router will be dependent on your ISP< and unless you are paying them extra for a static IP address, is likely to change every time you reboot - or sometimes they bump them every 24 hours. So, first thing is get a dynamic DNS Entry - www.dyndns.org is one supplier - I think you can get one address for free from them, pay for more.. YOu set up something like CMVideo.dynsdns.org on their site, and set up dyndns support in the netopia router... Then you want to open the specific port on your router, to go to the internal IP Address of your camera. (YOu mention Multiple Cameras - depends on the Camera you may have to go for multiple dyndns (one for each...) ).I am a little confused/concerned about the second router "tier" - if you have the Belkin configure as an Access Point only, all good, if you are trying to run it as a router behind a router, it will probably never work - double nat-ting" is a no no with most consumer Routers. Simple solution is to tap from Netopia lan side to Belkin Lan side (rather than Belkin Wan Side)