RCA Universal Remote Control - Answered Questions & Fixed issues

Code For Model RCR311S Code 1003 for Panasonic TV Code 1054 for Panasonic TV Code 1062 for Panasonic TV Code 1109 for Panasonic TV Code 1170 for Panasonic TV Code 1248 for Panasonic TV GOOD LUCK THESE ARE THE CODES LISTED FOR YOUR REMOTE/

RCA TV Codes: 000,006,011,019,027,034,038,044, 046,088

RCA Cable Box Codes: 000,027

RCA Universal Remote Control Programming Codes Programming Your Universal Remote.

Special Notes:
RCA, GE and Proscan Brand Devices:
Many of these devices (TV's and VCR's) will not need to be programmed. In the event that programming is required, the code search method is suggested.

The remote may already be set up to operate your brand of TV, VCR, or Cable Box. It is pre-programmed with following codes:

• TV-000
• VCR-000
• Cable Box-000
• AUX is programmed with VCR code 037

For brands that require programming, there are two ways to program: Using Code Lists or Code Search. Use Code Search if the code lists are not available or if the codes from the lists do not operate a device.

Programming a Device using Code Search:

1. Manually turn ON your device (TV, VCR, Cable Box)
2. Press and "HOLD" CODE SEARCH
3. Press and release the device button you want to set up (TV, VCR, Cable Box) However, if you are using AUX for a device, press and release AUX first and then the device button for the type of device to be programmed (TV, VCR, or Cable). The selected device button will flash once.
4. Release CODE SEARCH.
5. Press OFF/ON repeatedly until the device turns off (you may have to press up to 100 times at a rate of once per second).
6. Once the device turns off, press and release ENTER.
7. With the device on, press any other button. If the device responds, no further programming is required. If the device does not respond, repeat steps 1-6.

Programming a device using the Code Lists:

1. Find codes for each device and brand below.
2. Press and "HOLD" CODE SEARCH.
3. Press and release the TV, VCR or Cable button you want to set up. If programming AUX for a device, press and release AUX first and then the device to be programmed (TV, VCR or Cable). When the selected device button flashes proceed to the next step.
4. Enter the three digit code from the TV, VCR or Cable Box code lists.
   
   
5. Release CODE SEARCH.
6. With the device on, press another button, for example CHANNEL UP. If the device responds, no further programming is required. If the device does not respond, repeat steps 1-5 using another code number from the lists.

I need codes for Sony tv

Codes for Dynex TV with RCA remote control are:11463, 11785, 11810, 12049, 12184

There is no setup codes for Curtis VCR ' DVD combo, with this remote control.

Anbonn led tv code pls

Need code for lte dvd player

Roku is a streaming player; it streams many types of data like comedy, TV shows, horror, etc. Many users had admired to use the Roku because of its comfort and easy to use. The Roku Universal Remote code Comcast is used to control your entire device.

·Roku Universal Remote is programmed to access different devices like as TV, DVD, and VCR player. It is a more interesting that you can control your entire device in your single remote. ·This remote control is used to control the audio and video of any brand of your device. ·This code is identifiers for configuration of your device. ·There are two code lists they are CL3 and CL4. Check this code list to replace your batteries and cover. ·You can execute your device in 2 methods 1.Auto programming ·Use the universal remote to turn on your device. ·Then press "Setup Release" till TV button flashes. ·Enter the digit and choose the code to setup your device. 2.Manual Programming ·Use Comcast remote, if you want to program then you can use Aux KEY. ·Check the instruction for manual and start entering the code. First ensure that you have a Roku account or else get it from the Roku.com/link. For details contact@ +1-844-965-4357.

try these
Code For Model RCR412S
Code 1003 for Panasonic TV Code 1054 for Panasonic TV Code 1062 for Panasonic TV Code 1109 for Panasonic TV Code 1170 for Panasonic TV Code 1248 for Panasonic TV
you can find codes at http://remotefinder.rca.com/default.aspx?site=rca if you ever need codes for other.

Two things. "No signal" on a modern TV usually means the device connected to the corresponding input is either not configured right, is not set up for the type of cable you're using to connect its output to the TV, or the TV input "source" hasn't been switched to the actual input you're using. You mentioned a VCR, but I would take that out of the picture to simplify your troubleshooting, and just work with the converter box and the TV. If it still doesn't work, at least that means the VCR has nothing to do with it. Then, it would be nice to know for sure whether the converter is sending the TV the "no signal" message, or the TV was doing it on its own. If you get the message and then disconnect the interconnecting cable, and the message stops, then we know the message is coming from the converter. If it stops, the that means the TV isn't even seeing the converter. See, we are just cutting to problem in half bit by bit, to determine exactly where the problem is. Second, I sympathize and have little patience for a customer service rep that would give up so quickly. If the converter needs an antenna, then the CS rep should have advised you what kind of antenna it needs,and how to make sure its connected right. If a CS rep gave me such poor assistance, I'd return it for my money back and buy another converter. Its hard to know enough details to prove out exactly what is likely wrong, but these steps should at least help isolate some problems. And if it is the converter, at least you know one brand never to buy again.

Maybe you are doing something wrong. Have a friend try to do it and see what happens. Universals leave lots to be desired and you might just have to get an original OEM unit.

Trata con el c?digo del DVD marca 3M, ese es compatible con el DVD marca pronext, por lo menos para las funciones b?sicas.

Aqu? detallan como lo usaron desde una app de smartphone:

http://tv.yoreparo.com/dvd/codigo-de-dvd-pronext-t626432.html

Saludos

Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily. http://remotesearch.blogspot.com/ http://electronicshelponline.blogspot.com/ http://electrohelponline.blogspot.com/ Programming Notes • If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote. • Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality. This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device. Search the site by type in the "brand name" to your device; in the "Search box at the top right of the display window" to get gathered related posts.

If you wish to get some details about netflix; check the site linked here. Pull up older posts. http://electro-medical.blogspot.com/

U get those codes, if any, from the manufacturer of the universal remote.

Here are some codes for your Emerson TV.

065,067,075,076,079
011,026,027,028,029,030
031,032,037,042,053,064

Here are some instructions as well for your RCA Remote:
Programming a device using the Code Lists:

1. Find codes for each device and brand below.
2. Press and "HOLD" CODE SEARCH.
3. Press and release the TV, VCR or Cable button you want to set up. If programming AUX for a device, press and release AUX first and then the device to be programmed (TV, VCR or Cable). When the selected device button flashes proceed to the next step.
4. Enter the three digit code from the TV, VCR or Cable Box code lists.
   
   
5. Release CODE SEARCH.
6. With the device on, press another button, for example CHANNEL UP. If the device responds, no further programming is required. If the device does not respond, repeat steps 1-5 using another code number from the lists.

Hope that helps.

http://www.hifi-remote.com/
Try this website.

i need the codes for rca rcr6473r i have a go.video vcr dvd combo...

If you have the owner manual for the remote try all the panasonic codes or google for that with the model number of the remote--not all remotes will program for all models and if programs it may be missing key features the original remote had.

RCA remote control will have no set-up code to this device. Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily. http://remotesearch.blogspot.com/ http://electronicshelponline.blogspot.com/ http://electrohelponline.blogspot.com/ Programming Notes • If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote. • Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality. This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device. Search the site by type in the "brand name" to your device; in the "Search box at the top right of the display window " to get gathered related posts.