Top 20 Motorola DROID Turbo - Page 6 Questions & Answers

Press # long and realise

Put mailing tape across the screen then lift it off. I think that the sceens get stuck together and when you take the tape off it "unsticks them". If that doesn't work you can try to shut down and restart your phone.

yes

(Presuming you have a Windows/Apple/Linux computer) You can plug a USB or Motorola charging cable (as seen below) into your phone and your computer. After you plug your phone into the computer and unlock both the phone (p) and computer (c), the c will prompt you to decide what to do with the plugged in device. You can click to enable the transfer of photos (or files) and the c will open a new window with the contents of the phone {Phone and computer must both be unlocked and plugged in throughout the entire process!} You can right click (or ctrl + click on a Mac) on the Photos and chose to download them onto the computer. Once the download is finshed, you can unplug both.

Here is the best link to unlock any Moto Phone to use any network SIM Unlock motorola Phone How to Unlock motorola Phone

It can be remove by reset your phone. Follow the below steps to do it

1. Switch the phone off and make sure the battery is completely charged.
2. Press and hold at the same time the following buttons: Power & Volume Down until the logo and exclamation sign pop up.
3. To see the menu press Home and scroll down to choose Wipe Data, using the Volume keys.
4. Press the Power button to get the procedure started and wait for maximum 5 minutes until it's over

https://help.republicwireless.com/hc/en-us/articles/115006267747-Factory-Reset-for-Motorola-DEFY-XT

1. Ensure the device is powered off.
2. With the device facing up, pull out the SIM tray (located behind the Volume buttons). The SIM tray is located on the right edge behind the Volume buttons.
3. Remove SIM card from the tray. If applicable, refer to Insert the SIM Card.

https://www.verizonwireless.com/support/knowledge-base-118290

Motorola claims their Voice Privacy feature digitally "scrambles" the voice signals being sent between your phone and your cellular provider. https://motorola-global-en-uk.custhelp.com/app/answers/detail/a_id/5534/~/voice-privacy Not quite to the same security level as a truly encrypted call would be, but it does make it more difficult for someone to intercept/eavesdrop on your calls. https://www.computerworld.com/article/3058020/security/hackers-only-need-your-phone-number-to-eavesdrop-on-calls-read-texts-track-you.html

You can do this by following the below steps

• When using this feature; everything is deleted from the device.
• Reset will require a minimum battery level of 25%. If you are unable to perform a reset, please charge for 20-30 minutes and try reset again.

1. With the phone powered off, press and hold the Volume Down button and the Power button at the same time until the device turns on. 2. Press and release the Volume Down button until the arrow reads "Recovery Mode". 3. Press the Power button to restart into Recovery mode. 4. Wait until you see an image of an Android robot on his back. 5. While holding down the Power button, press and release the Volume Up button. 6. Use the volume buttons to scroll to "wipe data/factory reset" and press the Power button to select it. 7. Scroll down to "Yes - erase all user data" and press the Power button to select it. https://motorola-global-portal.custhelp.com/app/answers/indevice_detail/a_id/120269/p/30,6720,10216

There are a couple of ways to bypass your Motorola Device. Before that, you need to know the requirements. Requirements

• A PC or a laptop
• An active internet connection
• A USB cable to connect your device

Instructions

1. Download the FRP Unlock Tool on your PC
2. Download the Motorola Driver on your PC
3. Install the driver, extract the FRP Unlock Tool to install it.
4. Run the tool

Follow the rest of the process from here FRP Unlock Tool

Bad battery..Replace it

My Motorola T-215 was not charging. It would light up when I plugged it in but would not hold a charge long. I placed the whole unit in the freezer for 4 maybe 5 hours. I plugged it in and the unit is charging and working again. Thank you Jesus.

the age of the battery or battery condition are reasons for going flat batteries loose charge from internal failures so have the battery load tested there is not time guarantee on batteries as that is why there is a warranty period having proved the battery to be good, place an amp meter in the circuit ( a crab claw unit can be attached around the ground cable preventing the necessity of removing the cable and resulting in the loss of radio codes and the like ) to determine the amount of current being drawn to get an idea of the component drawing the current suspects areas of current draw are glove box lights staying on interior lights staying on faulty light control modules faulty relays staying activated seat heaters staying on

https://frpapk.com/

Google headset <make> <model number> driver for Motorola Whisper

notify phone company problem with phone line

It may be underneath the battery.

Contact your provider to port the number accross to new phone,you will need new phone details and imei number.

When the text window is open there is an AB at the top. With that window open try pushing the soft keys or other keys until that AB changes to ab or Ab, whichever format you're looking for. ab will be all lower case and Ab will capitalize the first letter of a sentence and possibly some proper nouns.

1. Ensure the device is powered off.
2. Press and hold the Volume Down button for 3 seconds.
3. While still holding the Volume Down button, press the Power button then release both buttons.
4. Select Recovery mode. Utilize the Volume buttons to scroll through the menu options and the Power button to select.
5. From the 'No command' screen (image of an Android with an exclamation mark), do the following to display the menu options: Ensure the steps below are performed in a timely manner. If power is held too long (longer than 5 seconds), the device resets.
   1. Press and hold the Power button.
   2. While continuing to hold the power button, press the Volume Up button then release all buttons.
6. Select Wipe data/factory reset. Utilize the Volume buttons to highlight and the Power button to select.
7. Select Userdata + personalized content. Allow several seconds for the factory data reset to complete.
8. Select Reboot system now. Allow several minutes for the reboot process to complete.
9. Now your turbo droid no longer asking for google account

https://www.verizonwireless.com/support/knowledge-base-118101