Top 20
Cavs JB-99 - Page 8 Questions & Answers
My provide TV 3200 needs to be reset to work with my OTA indoor
If you're having trouble getting your OTA channels to work on your ProView 3200 flat screen TV, there are a few things you can try:
- Verify that the antenna is correctly and securely plugged in by checking it. Try raising your over-the-air antenna if you're using one, ideally so it's close to a window. To determine out which way your antenna should be pointed, you may also use an online station finder.
- Restart the TV: Press the power button to turn off your TV, then disconnect it from the mains, wait two minutes, plug it back in, and press the power button again to turn it on. Try launching an automated channel search on your TV after it has restarted.
- In the event that your TV is still unable to pick up channels, check the tuner and make sure the coaxial line is in working order.
I hope this helps you restore service to your OTA channels!
When I turn the tv on it remains black . No picture only sound.
Hello, this happens when the HDMI connection on either device has failed or the HDMI cable is bad. Can you still access the television menu with a button on the television or from its own remote? When this does not help and unplugging the television, for some time did not, then take a clear flashlight and shine its light everywhere on the screen. When the backlight is broken, you can still see what is on screen in that small lit spot. This is a common failure and can often be repaired. There are video's about it on YouTube. Capacitors for the power supply hold high voltage so unplug the set from the mains and wait a little before even opening. Still never touch those small towers. When their top, that looks like divided in three parts, isn't flat anymore then there is a power issue and those capacitors must then be replaced.
My Ecco TV is playing but the problem is pic is not clear it's dark . Please help
The screen may become dark if Picture mode is set to Cinema or Custom. If the screen continues to remain dark after changing the picture quality mode, go to the Backlight, Picture, Brightness menu and adjust the brightness to your liking. When Power Saving is fixed to Low or High, the screen becomes dark. Some TVs have a Light Sensor so the picture will just become brighter or darker depending on the lighting in the room.
You can also try programming from a different source, like a DVD player or VCR to check whether the problem is caused by the device that sends the signal to the TV.
Not finding what you are looking for?