20 Most Recent Samsung HLR5667W 56" Rear Projection HDTV - Page 8 Questions & Answers


If set displays intermittent green outlines around images, check DVI cable attached to DMD board from digital board. Poor connections on the DVI jack on the DMD board can cause the intermittent symptom. Pull up slightly on the body of the DVI cable connector and check video. Replace DMD board as necessary.

Samsung HLR5667W... | Answered on May 26, 2008


GO TO SAMSUNG.COM TO DOWNLOAD THE OWNER'S MANUAL

Samsung HLR5667W... | Answered on May 16, 2008


I have the exact same issue that ididitmyself described above. I have a vertical gray line shadow that is hindering the quality of the image for a few weeks. My TV's model number is HLR5667. It has been 25 months since I bought it. Any help resolving this would be greatly appreciated. I hope that Samsung representatives read these posts and take corrective action to their products and assist us in guiding us to resolve this issue. This is negatively reflecting on their image in the eyes of consumers.

Samsung HLR5667W... | Answered on Apr 30, 2008


The ballast is what lights the lamp installing yourself is going to be about 200 a shop maybe 400 to 600 depending on where you have it done.

Samsung HLR5667W... | Answered on Apr 05, 2008


Yes, it could. There is a light pipe in the light path that could now be broken from the bumping or it could just be out of line from the bumping. Another problem could be the mirrors in the projection path could just need adjusted by the 3 screws that are beside the mirrors. This may also happen when bumped.

Samsung HLR5667W... | Answered on Mar 29, 2008


Sounds like a bad DLP chip and they will prob end up replacing the light engine in the set most people dont like replacing this part. Hopefully they get you up and running.

Samsung HLR5667W... | Answered on Feb 08, 2008


Sounds like engine lamp is bad

Samsung HLR5667W... | Answered on Jan 24, 2008


remove the back cover u will see the fans one for the ballast and the other for the lamp

Samsung HL... | Answered on Jan 08, 2016


Sounds like a door switch is not making proper contact--or has been damaged. Check the lamp door switch and see if it is properly seated and the pin on the door is hitting the leaf of the switch.

Samsung HL... | Answered on Nov 26, 2014


You need a color wheel--common on these sets. Get a real phillips bulb and you should be set for awhile. The cheap generic bulbs are fine to get you through a few MONTHS....but NOT much longer. . An E22H-120/132 watt lamp is correct--and if you can replace just the bulb-(NOT hard at all to do) it will save you a LOT of money.

Samsung HL... | Answered on Nov 26, 2014


just from personal exp the easiest thing to do may fix or at least make it better. if u see puffed and leaky caps on power supply replace capacitors. if really dusty clean. both previously mentioned and both helped me. my tv was completely dead and replacing caps got it to power back up and work. it takes two trys to come on but works great so far. then i cleaned every nook and cranny with a small vacuum hose and different size/angle brushes that could be attached to hose. i only took out the psb board with caps and didnt touch anything in there that i could mess up. just cleaning helped enhance the colors. right now this is the best picture ive had on a tv and it was completly dead when i got it.

Samsung HL... | Answered on Jul 30, 2014


Check all your input cables & be sure they are snug on both ends, also check all your wiring connections inside the TV. you may have not gotten something back correctly or properly.

Samsung HL... | Answered on Jul 25, 2014


EURO STAR LCD TV 32" BLANK PROBLEM

Samsung HL... | Answered on Jan 23, 2014


(Please check your model number - it appears to be incorrect, I believe it's HL-S5687W)

1) How old is the lamp? (how many hours on it)
2) Is the lamp an original equipment lamp, or aftermarket?

It's either the Lamp itself (it's not common for a sudden reduction in brightness), -or- the Lamp Ballast has gone bad. This is the power source for the Lamp, and although they usually die completely when they do go, sometimes they will act just as you have described... they fail into a "low power" mode.

If the lamp IS an original mfr lamp, and if it's nowhere close to being near "end of life", then I'd say it's likely the Ballast.

Prices for the original Samsung lamp run around $100 onamazon and others.

The Ballast p/n BP47-00037A has a cost of around $50 to $100 online.

Google those p/n in "Shopping"

The Ballast can be replaced without great knowledge, but will require some dis-assembly, and CARE.

WARNING - Dangerous, and even lethal voltages are present inside your TV set. Do not attempt this unless you are trained in these kinds of repairs. Leave the TV unplugged for several hours (or preferably a full day) before attempting such repairs.

Samsung HL... | Answered on Jan 12, 2013

Not finding what you are looking for?
Samsung HLR5667W 56" Rear Projection HDTV Logo

182 questions posted

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76100 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1691 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

HL Samsung

  • HL Samsung

Most Popular Question

samsung dlp hlr5667w went blank just

  • Televison & Video
Loading...