20 Most Recent
Samsung HLN5065W 50" Rear Projection HDTV-Ready Television - Page 2 Questions & Answers
It is making a humming noise
Rear projection TV's have fans that can become noisy with age also the colour wheel motor also can become noisy. Replacing the fans should be easy and cheap, the colour wheel motor not so much.
DLP TV starts to loose picture after 1 - 1/2 hours of use
This tv has a 3 board video path. Analog main pcb --->Digital main pcb --->DMD pcb. see which inputs have the problem to narrow it down. if only some inputs, suspect analog board. if everything flickers(all inputs and menu), suspect the dmd or engine. you can see the lamp shine out the back. if the lamp is flickering, suspect lamp or ballast.
Pixels break up
Are you sure this is not a signal issue? Sounds like one to me...
Replacing ballast
Hello,
You would need to test the voltage coming to the ballast which depending on the ballast should be at least 320V but nothing higher than 370V maybe even 380V? (if someone know the exact please post)
CAUTION DO NOT TEST THE POWER GOING FROM BALLAST TO THE LAMP ITSELF (the ignition charge is too much ~15kV)
I assume you tried a new original Philips lamp and that you replaced the lamp door cover correctly.
Is this tv bluray compatable
This model will project blu rays at a 720 resolution, since I cannot find if it had a HDMI input you might need a HDMI to DVI converter easily found at radioshack or online! This so you can get a greater picture!
Hope this helps!
There is no color and a very loud noise comes from
Sounds like your color wheel has failed. Its right about time, they don't always go bad but do fail regularly. This one uses a bp96-00250a and it costs about $95 plus shipping. You can get one straight from samsung it will come to about $105 after shipping.
http://www.samsungparts.com
Its a little tricky to get it in, and its glass so its fragile, but a mechanical person with a few screwdrivers can get it done in an hour or two. Let me know if I can be of further assistance.
Focus on samsung rear projection tv
Adjust focus is really a skilled work indeed. If you wish to get more details, check
this site.
Pull up older posts there. Check the site with patience, as it has over
2250 posts now. All are related to
electronic equipment repair help.
HLN5065W not recognizing dish network
Hi Judy, my name is Mike Houston a Social Media Representative at DISH. I see there is a problem with the Samsung not recognizing the DISH equipment. I am happy to help you today with this issue. Are you not getting a picture or message on the screen? What type of receiver are you using, SD/HD? I will provide you my e-mail and you can contact me directly: [email protected]
Samsung HLN5065W replaced the lamp. Tv wont stay on.
When your TV turns off without any reason, there are a number of possible causes. The problem could be a loose connection, a sleep timer that's been activated accidentally, or even a buildup of dust on the circuit board that causes overheating. To help you better determine what the problem and solution might be, follow the simple troubleshooting steps in the article
TV turns off. I hope this helps!
Not finding what you are looking for?