Hisense 40" Smart TV Full HD 1080p LED HDTV with Built in WiFi - 40K20D - Answered Questions & Fixed issues

Bad backlights

Does your TV have RJ45 connector ? That looks like Insert a RJ45 patch cable from the router to that port using taht looks like this Your TV should AUTOMATICALLY now be on the network

Ok what kind of tv do you have? I need the make model ? And what kind of remote do you have?

Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the ‘device’s brand name list’ in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.http://electro-medical.blogspot.com/

Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily. http://electro-medical.blogspot.com/

That depends on the type of antenna, but in general it attaches to the same jack as your cable would. On the tv setup menu there witll be an option for cable or antenna, and then you'll need to run a scan to setup the channels. If the antenna you chose doen't have a ***** on connetor like cable, you can get an adapter at Radio Shack.

Hi Laz Televisions get power supply unit problems that do exacly what your describing. It is Caused by ageing Electrolytic Capacitors. If your not tech savvy then take it to a technician otherwise Find & Replace the Caps yourself Try These Switched mode power supply How to Replace an Electrolytic Capacitor Good Luck

I had the same problem right up until the HDMI stopped working altogether. I had to use the ''component'' cables instead. The problem in my case is a bad HDMI socket (circuit board). The word ''randomly'' caught my attention. That's exactly how it happened with mine.

These are all the codes. It is better to buy a remote specially made for that model. Read this https://www.fixya.com/support/r29872378-universal_remotes_no_facsimile_remote

Hisense TV universal remote control codes (3, 4 and 5 digit)

eliztech.com https://www.eliztech.com > remotes > codelists > hisense-... Universal remote codes for Hisense TV sets - 3 digit, 4 digit and 5 digit codes. ..

https://www.google.com/search?q=hisense+43a4k+display+time+setting ..

Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. The site has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily. http://homenol.blogspot.com/ http://remotesearch.blogspot.com/ http://electronicshelponline.blogspot.com/ http://electrohelponline.blogspot.com/ Programming Notes • If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote. • Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality. This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device. Search the site by type in the "brand name" to your device; to which you want set-up codes; in the "Search box at the top right of the display window" to get gathered related posts.

Hisense are a budget set, cheap components and are usually not worth fixing when they fail. Some ideas here https://www.google.com/search?q=Hisense+TV+come+back+on+it%27s+just+power+up+and+then+it+goes+through+a+loop ..

Question edited for clarity. You say you typed 'http', but did you type 'http://'? Your Enter button is the OK Button in the centre of the 4 Arrows on the remote. https://remotes-world.com/products/hisense-tv-49-n-2170-pw The best way is to use a Bluetooth keyboard if the set uses Bluetooth connectivity. ..

Hisense do make Service Manuals available, but there isn't one online for that set. Contact them direct in your country. We are Fixya, not Hisense, we just have a Hisense category. https://www.google.com/search?q=hisense+led+tv+model+55k303+service+manual https://hisense.fr/download/serie/A9G/guide-reparation.pdf Hisense Support https://www.google.com/search?q=hisense+television+customer+service ..

It is a Chinese set and they view upside down. Easy to fix.

Hisense. My picture has flipped upside down and the remote

JustAnswer https://www.justanswer.com > TV Problems Sep 2, 2019 - Hisense. My picture has flipped upside down and the remote is not working property. I see the menu on back. Yes its the - Answered by a ... 1 answer · Top answer: Very much welcome, wish you the best~

Hi Aric, my Hisense tv screen is upside down. what do I do...

JustAnswer https://www.justanswer.com > TV Problems Dec 7, 2014 - Please disconnect the set from power, then press and hold the power button on the TV itself (not the remote), for 15 seconds and release. Then ... 1 answer · Top answer: You're welcome. If satisfied, could you please click a POSITIVE RATING? I am ..

See page 24 of User manual (Connecting AV Devices). Connect your device as told there. If problem is not solved then see page 56 troubleshooting of user manual. E-Manual MT9612 NA (hisense-usa.com)

Ensure you have selected the correct system output. If Svideo, check the Chroma is switched on. If using RCA jack, use all four connectors.

Often the instructions for programming a TV remote control is included in the TV manual. The EN 31201A remote came with several TVs including the Hisense F39V77C. The manual for this TV only lists a few cable and satellite box codes: https://www.manualslib.com/manual/594196/Hisense-F39v77c.html?page=11#manual . This page refers you to the manufacturer's site for additional codes. The Hisense-usa.com site did not list the specific TV that I found that used the EN31201A remote. Since the F39V77C first shipped in 2012, the remote would probably be limited to use with devices that were built in 2011 or earlier. I recommend a universal remote that includes support for streaming devices. Unfortunately, I don't know which support Fubo TV specifically. Most packaging advertises Roku or Amazon Fire support. You can find the code lists for some RCA universal remotes online. (Most of the others require finding a code written inside the battery compartment to determine the remote generation and code list.) I wish that I had better news for you. Cindy Wells

Bypassing a board or a part on the board would be like removing the spark plugs from a car and expecting it to run. On a serious note, if the TV has lightning damage recycle it and buy a new TV, you may be able to turn in a claim to your insurance company, once a set has storm damage even replacing a board may not fix it long term, in our service center we usually won't repair a TV the customer advises of lightning damage,it's a good way to get call backs