Top 20
Dyson AM08 Pedestal Fan Questions & Answers
My power flash off & back on, now I have an F6 error, how do i fix / reset it? Thanks
Hi Dana, it's Jack at Dyson.
I'm sorry to hear you're having difficulty with your Dyson Cool AM08 Pedestal fan. If your machine displays an F6 error code I would strongly encourage you to contact Dyson directly, as we will need to provide further assistance to help you to resolve this.
When you have your machine easily to hand, please contact the Dyson Customer Helpline on 0800 298 0298 (UK), 1-866-693-9766 (US), 1-877-397-6622 (CA) or 1800 239 766 (AU). Our experts will be happy to take some additional details and advise you of your options.
We'll look forward to speaking with you.
6/1/2015 5:34:44 PM •
Dyson AM08...
•
1,986 views • 0 helpful votes
C1 error code on dyson pure hot+cool
The C1 error code on the Dyson Pure Hot+Cool indicates a communication issue between the control board and the motor. Here are a few steps you can take to try and resolve the issue:
- Turn off and unplug the machine for at least 10 seconds, then plug it back in and turn it on again. This can sometimes reset the control board and resolve the issue.
- Check the filter and make sure it is clean. A dirty filter can cause the machine to overheat, which can trigger the C1 error code.
- Check the air intake and make sure it is not blocked. If the air intake is blocked, the machine may not be able to cool properly, which can cause the C1 error code.
- If none of the above steps resolve the issue, the problem may be with the control board or motor. In this case, it is recommended to contact Dyson's customer support for further assistance. They may be able to help you diagnose and resolve the issue, or recommend repair options if necessary.
2/27/2023 11:27:47 PM •
Dyson Dryers
•
359 views • 0 helpful votes
Dyson Am04 model no longer turns on due to a power surge. What part is required to fix it? TIA.
First thing is to check the wall socket. Use a desk lamp or something similar and plug it into the socket you use for the heater. If the lamp works so does the socket. Next check the fuse. UK machine have a fuse in the plug, other countries use different systems.
If all these check out OK the surge may have damaged a circuit board inside the heater. Only a Dyson specialist could help you with that.
8/17/2020 4:43:12 AM •
Dyson Dryers
•
391 views • 0 helpful votes
What does code f4 mean on a dyson am08 fan
Turn the power off and unplug the machine for 60 seconds. Plug the machine back in and turn power on. Repeat this process up to 3 times until the F4 error code has cleared.
9/29/2015 2:58:49 AM •
Dyson Dryers
•
9,221 views • 0 helpful votes
Circuit board repair
ACS repairs most makes and models of circuit boards. If you do not see your
manufacturer in our LIST OF OEM MANUFACTURERS,
don't worry. We can probably repair your item. Call to speak to one of customer service reps for help,
1-800-605-6419, email at
[email protected],
or use our Contact Page
bathroom light
5/8/2012 6:52:40 PM •
Dyson Dryers
•
567 views • 0 helpful votes
Faqe7077kw0 dryer beeps 3 times won't start replaced the door switch same problem. Hold in the select button and press start and it will run until I let up on the select button
- Check the Power Supply:
- Ensure that your dryer is receiving proper power. Use a multimeter to test the wall plug. You should have two poles giving 110-120 volts each and a ground. If only one side is hot and the other is not, you could have issues.
- Common Causes for Dryer Not Starting:
- Let's explore some common reasons why your dryer might not start:
- Thermal Fuse: The thermal fuse is a safety device that protects the dryer from overheating. If it's blown, the dryer won't start. Test it for continuity using a multimeter Check your exhaust vent for restrictions..
- Start Switch: If the dryer hums but doesn't start, the start switch might be faulty. Test it for continuity with a multimeter.
- Door Switch: The door switch activates when the dryer door is closed. Listen for a "click" when you start the dryer. If you don't hear it, test the door switch for continuity.
- Door Switch Solution:
- If the door switch isn't "clicking," it might be the culprit. Try this:
- Push the length of the switch from side to side (without removing it) to see if it clicks.
- If it clicks, it's likely not defective.
- Reassemble the dryer to see if it works.
Remember to
safely disconnect the power before attempting any repairs. If these steps don't resolve the issue, consider seeking professional assistance or further diagnostics
3/8/2024 7:18:22 PM •
Dryers
•
26 views • 0 helpful votes
Not finding what you are looking for?