20 Most Recent Proscan 7-Inch Android Internet Tablet, Capacitive Touch Screen, Android 4.1 Jelly Bean, with Included Case and Keyboard - Page 3 Questions & Answers

You have to reset it to factory default just follow those steps: 1. shutdown the tablette 2. hold volume up button and press the power button 3. when manufacturer logo come realise the power button but keep hloding the volume button to get into recovery mode 4. in recovery mode use volume up/down button to navigate and the power button to select 5. choose WIPE DATA / FACTORY RESET than select YES .... wait a moment then select WIPE CACHE PARTITION 6. finale step select REBOOT keep in your mind the all data in the phone will be erased (apps & games) ALL DONE!!!!

what you mean cant open?

The battery needs replacing

Go to the website and print it out

You have to reset it to factory default just follow those steps: 1. shutdown the tablette 2. hold volume up button and press the power button 3. when manufacturer logo come realise the power button but keep hloding the volume button to get into recovery mode 4. in recovery mode use volume up/down button to navigate and the power button to select 5. choose WIPE DATA / FACTORY RESET than select YES .... wait a moment then select WIPE CACHE PARTITION 6. finale step select REBOOT keep in your mind the all data in the phone will be erased (apps & games) ALL DONE!!!!

If you tell your tablet to connect to your router (click on your router) It should then ask ask for the pass phrase or password you will find this on your route usually on a sticker on the bottom enter this and it should connect you

Try a reset with an opened paper clip in the reset hole. It might work but you will lose saved data. Otherwise check out warranty.

Hi. Try to do backup or start last good configuration: To start your computer by using the Last Known Good Configuration feature, follow these steps:

1. Start your computer.
2. When you see the "Please select the operating system to start" message, press the F8 key.
3. When the Windows Advanced Options menu appears, use the ARROW keys to select Last Known Good Configuration (your most recent settings that worked), and then press ENTER.
4. If you are running other operating systems on your computer, use the ARROW keys to select Microsoft Windows XP, and then press ENTER.

If you don't have Cloudprint download it to your phone and set it up. Then, again, on your phone, add your printer to the cloud-print settings then install app to activate the printing. Canon, Epson, HP and Kodak ship android and ios printing apps. You look for it on the play store and app store. You can also use the Easy photo-print. It identifies the printer immediately. You can touch the Extra key to activate printer as well.

Have you entered to Setting-Sound to check. If so, and if that does not work, try with headphones. If still does not work, try Setting-Reset to factory (you will losse everything so backup it) If does not work... the unit is damaged

Usually it is.. this equipment is a very low quality Chinese one. I solved using a different connector from one universal Targus power supply for laptops. But it could cost you more than buying a new tablet. However, if you need to extract some info from it and you don 't want to use an additional power supply, there is a way to put a tiny aluminum band paper around the plug to press the contact inside. That will last while you don't pull the plug again... very impractical but only for emergency.

Since I don't know which exact Proscan Tablet you have, here is how to restore the PLT9045K. 1) Make sure the tablet is powered down. 2) Press and hold VOLUME UP(+) and DOWN(-) buttons, plus POWER button all at the same time. 3) Insert a metal pin in the RESET hole at the back of the tablet, then push and hold it for 2 seconds, while still holding the VOLUME and POWER buttons. Make sure the pin is pushed. It seems like nothing happened, but just keep on going to the next step. 4) Power ON the tablet and immediately, PRESS and RELEASE continuously the VOLUME UP(+) button in order to get the display as showing dead tablet (dead robot). 5) This is the critical part. Make sure you do the right sequence or you will start again from the beginning. Press and hold the POWER button, then press and release VOLUME UP(+), and the display will give you a screen showing different options. 6) Choose the option wipe data/factory reset, by clicking POWER button to scroll down. To execute the selected option, press VOLUME UP(+) button. The tablet will reboot back to its factory setting.

What happens when you hit the internal reset button?