20 Most Recent Janome Memory Craft 200E Embroidery Machines - Page 3 Questions & Answers

Error codes 7 and 4 on a Janome 770 QCP indicate a problem with the needle bar and/or threading mechanism. Try checking the needle bar and ensuring it is properly positioned and tightened. If the needle bar is not in the correct position, it can cause the needle to be out of center. Additionally, make sure the thread is properly threaded through the machine, including the take-up lever, needle, and thread guides. If the issue persists, you may need to consult a professional

The Janome HC1200 is the HobbyCraft version of the Janome 219S. This machine uses a daring plate to cover the feed dogs. This was included in the original accessory set for the machine. See the picture of the standard accessories here: https://www.manualslib.com/manual/1870252/Janome-219s.html?page=5#manual . https://www.manualslib.com/manual/1870252/Janome-219s.html?page=16#manual shows putting on the darning plate. If you do not have the darning plate, check with a sewing machine shop. https://coulingsewingmachines.co.uk/janome-darning-feed-cover-plate-735801008-fits-most-basic-models/ is an online source. I hope this helps. Cindy Wells

this hap[pens to all of us eventually. place the bottom where it needs to be and the long screws and short screws become apparent as you attempt to put them in.. short screws are too short for certain holes etc..

Perhaps this will assist. There is a suggestion you may not have held down the reverse stitch button for the first 3 or four stitches but I can't make sense of that. https://www.facebook.com/karen.m.sewing/videos/how-to-fix-the-backstitch-on-many-later-model-janomes-and-kenmores/125022392782746/

Question edited to add Make and full name. Category moved from Cars and Trucks to Janome. Yes it does. $30 here https://www.sewingpartsonline.com/janome-my-excel-23l-sewing-machine-parts.aspx?index=1 Videos here https://www.google.com/search?q=Excel+23X+walking+foot ..

Search for: Make Model manual

Question edited for clarity. Question moved from Computers to Janome. There seems to be different versions, perhaps country versions USA and Australia. Some have 'New Home', some don't. There is a manual in the link. https://www.google.com/search?q=JANOME+NEW+HOME+MY+EXCEL+18W-MW3018 ..

Unfortunately that is the serial number not the model number. The videos in the link might help, but all the parts schematics work on Model Numbers. https://www.google.com/search?q=janome+upper+tensioner+replacement+parts ..

619 Janome Instruction Manual pdf format Janome New Home 619 Sewing Machine Instruction Manual ...

Try the manufacturer

Yes, you should use one drop of light machine oil on every joint or anything that slides.

This would be a problem with the foot control. It needs cleaning or replacing. This link says it has a maximum speed setting

Janome Horizon Memory Craft 8200 QCP Special Edition

https://www.sewingmachinesplus.com > j-8200qc-sp Other special features include an automatic needle threader, speed controller to set your maximum sewing speed and stop / start button if you choose not to use ... https://www.google.com/search?q=Janome+Secio+8200+over+speed ..

Hi, Please turn off your machine and raise the presser-foot and needle bar. Then, you can turn on your machine again. If that does not work, please test another design for your machine to see if the error occurs again. If not, you might need to recheck the programming that you've used for the first design. Thank you.

Hi, please apply oil to any troublesome parts before attempting to move forward again. Thank you.

You may need to rethread all the threads because most sergers need to be threaded in the right sequence. I looks like this one has to be threaded starting at the right and progressing left.

Possible password protection ... give Janome a call.

If Janome doesn't have them, you may be able to find one on web sites like eBay, Craigslist, Etsy...There are after-market vendors who sell extension tables cut to fit your machine. You just tell them the make and model of your machine and they make it for you.http://www.sewingmachinesplus.com/extension-tables.php

Service manual is available at modest cost. $12 USD or $5.50 AUD. https://www.google.com/search?q=janome+mb7+service+manual Adjusting needle bar height https://www.google.com/search?q=janome+mb7+adjust+needle+bar ..