Visual Land Prestige Pro 7D 7 inch Tablet with 8GB Memory - Answered Questions & Fixed issues

If your device did not come with a charger in the package, go to a local electronics store and you should find chargers there! If not, look here. RadioShack

First lesson here in charging 101: read your info on what u got. In most of them it tells you to turn it on and use it until the item you got dies then you charge it, you can turn it on if u want to see it charging but don't play on it. An it's best to do when you can watch it, so charging it overnight is NOT good, because it will be done before you wake and over charging is not good. It makes the battery weak so holding a charge gets less and less over time. Never leave your cord in the wall when it's not charging your item. Power from the wall is still running through it and slowly frying it. Thats why people go thought many cords for one item. The reason for the first battery kill and then a full charge is a stronger battery life. It gives your battery about (but don't hold me to it) a 15% increase on life. So back to your question. It depends on the item and battery life it has when u pull it from the box. In most cases battery is about half full. Plus charging from a outlet lets say to a car charging is better and faster for your item. When most battery's are being made and tested in factory's it is a outlet that is being used. So most info on timing a charge is based on info gathered From tests done from a outlet

first try pushing reset buttom or a hard reset hold power button and tap vol up

call company

many small ribbon coinnectgors use a hinged bar that presses the cable down against conenctor contacts. Flip up the bar carefully with your fingernail. It will pivot upward to release the cable. But then, some cables are not removable. They are held in place by sticky plastic tape. LDS screens often employ that concept. Best not to try to separate the cable from the glass. Unplug the cable at the circuit board end.

try holding the button for 6-8 seconds

did you try the recovery mode? Visual Land Prestige Pro 7D Recovery Mode

You can't you will need to save the bookmark in the browser.

If it is even possible to get a replacement battery, getting to the battery will most likely require a small Philips screw driver and possible plastic pry bars to remove the rear bezel. You can use the iPad repair guides here as a reference, plus all required tools can be purchases here. Repair Manuals for Every Thing iFixit

Visual Land Prestige Pro 7D Recovery Mode

visual-land.com/support_form.html

check if ave another contact number to reach them or if you can go to there physically

go to mobile market

Turn it off using Power Key, Take the Battery out and re-insert it. Then turn it on. If it works, better, else contact Customer Care.

Try restarting the tablet with a hard restart.

google replacement screens and you'll find several companies.

some times if they won't turn on..the way i found it to help was to plug it into your computer for awhile to charge it...then press the3 power key..if not presss power key and +volume key at the same time to reboot

I would report it to your warrenty place or where ever you got it and get a new one

What is the model?If you want the unfreeze code I suggest you can approach Theunlockarena.com and specify the model,country,locked network.Based on the availability you can get the unfreeze code. http://www.theunlockarena.com/samsung-usa-fast-unlocking-service/rs13wp10/

"rom"? What exactly are you trying to do? Are you referring to ROM as part of the tablet's memory? If yes, you probably will not be able to do it. ROM is a memory chip built onto the circuit board itself inside the tablet. You would need to completely dismantle the tablet to do it. Most tablets are not built to be taken apart for repairs.