Sony VPL-EX1 Multimedia Projector - Page 3 - Answered Questions & Fixed issues

IS THE COOLING FAN WORKING?

I show no such control.

You could try Radio Shack.

Find one on eBay! "Air Filter for Sony Projector BRAVIA VPL-VW60 SXRD" $7.90 Air Filter for Sony Projector BRAVIA VPL VW60 SXRD eBay Peggy... it appears that this is nothing truly 'exotic' about this filter. You MAY be able to go to a Hobby Shop or Craft Shop and find some 'fine mesh foam' and cut to fit and still have some to spare! Anthony

Some electronic items are set to go off like flat screen TVs do. I would check settings. Also online manual fir more details

Camera is fubar. Sorry.

light is in red means standby mode. Flashes in red - The projector is in abnormal status. Symptoms are indicated by number of flashes. Address the problem in accordance with the following. If a symptom persists, despite having taken measures below, consult with qualified Sony personnel.

No matter what errors are present you will need the manufacturer to repair it, they do not supply repair info or parts to the public, only approved repair stations.

https://community.sony.com/t5/Home-Theater-Products/How-to-reset-STR-DA4600ES-back-to-factory-defaults/td-p/50195

yes ebay has them

First...Check that all cables are connected correctly..If they are then look at the condition of the cables you're using to see that they are not damaged..Second..Your projector has a lamp that may need to be replaced because even though your unit may not show you a picture then seeing the light will eliminate having to replace the bulb

If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ http://schematicscom.blogspot.com/

What is the exact model number of the Sony TV? Check if the same issue occurs when connected to a different source device like DVD player or when the TV is not connected to the cable box. Disconnect the connected devices and turn ON the TV to check if the red light still flashes

You need to press the power button and menu button in a special order. Refer to page 19 in the manual for specific instructions. http://www.projectorcentral.com/pdf/projector_manual_5975.pdf

Look at the ribbon ink roll to see if there is a tear in it. You can join it back together with scotch tape and put it back in the printer. Same goes for the paper

Have a nice day! We supply original projector parts: lamp, bulb, Lcd panel, Lens, DMD chip, color wheel, motherboard, powersupply ... with high quality and competitive price. Jerry Lampdeng Limited Mobile: 0086-13178867858 Wechat ID: 008613178867858 Whatapp ID: 008613178867858 Skype: [email protected] http://www.lampdeng.com

http://www.aliexpress.com/store/1669091 Have a nice day! We supply original projector parts: lamp, bulb, Lcd panel, Lens, DMD chip, color wheel, motherboard, powersupply ... with high quality and competitive price. Jerry Lampdeng Limited Mobile: 0086-13178867858 Wechat ID: 008613178867858 Whatapp ID: 008613178867858 Skype: [email protected] http://www.lampdeng.com

Any one of the cooling fan inside the projector is not running. There can be two or three fans inside the projector. If you wish to get some details; check the site linked here. Pull up older posts..... http://electro-medical.blogspot.com/

If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electro-medical.blogspot.com/