2002 C320 - Answered Questions & Fixed issues


There's a website that has all this information about all this and manuals everything totally free there are many actually but I personally like few .. let me know if u need help
thanks

2002 C320 | Answered on Jan 25, 2019 | 121 views


hi have a pic of location but cant seem to attach it or upload.

2002 C320 | Answered on Jan 13, 2016 | 36 views


if fuse is out either light would not work. The wire is bad some where or the bulb is out

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/jim_c09d8140f32619a8

2002 C320 | Answered on Jul 12, 2015 | 148 views


What a question and read your manual...... and don't forget to put the gasket on it's place again. I assume you didn't google first since there are plenty of mercedes forums, which also are too lazy to take a look themselves.

2002 C320 | Answered on Mar 26, 2015 | 107 views


try finding it here>>www.discountbargainprices.com

Mercedes-Benz... | Answered on Feb 27, 2019 | 98 views


Becker Code is 22325

________________________________________

  • Radio Codes and advice are always available here

www.ukbookshelf.co.uk

  • Mention FixYa Forum

Mercedes-Benz... | Answered on May 14, 2016 | 76 views


These people might be able to help with that............

Mercedes-Benz... | Answered on Dec 12, 2015 | 167 views


You cannot. They are all expensive as are many other parts for that vehicle.

Mercedes-Benz... | Answered on Sep 26, 2015 | 34 views


one of these models may be the vehicle
http://www.blumke.net/content/m/mercedes-actros-fuse-location.pdf

Mercedes-Benz... | Answered on Apr 20, 2015 | 166 views


White smoke almost always indicates a blown head gasket, or cracked head. A compression test will tell you for sure.

Mercedes-Benz... | Answered on Feb 18, 2015 | 52 views


http://www.fixya.com/tags/po496_code

If you need further help, reach me via phone at https://www.6ya.com/expert/david_1f7d1c330c9dd97d

Mercedes-Benz... | Answered on Dec 31, 2014 | 66 views


The causes for this DTC may include: Low fuel pressure caused by a clogged filter, failing fuel pump, failed fuel pressure regulator or clogged or leaking injectors. Rough running engine due to misfiring plugs. Many engines have misfire codes to indicate the cylinder effected, such as P0304 for number 4. A large vacuum leak would cause a massive amount of un-metered air to enter the intake manifold resulting in an overly lean mixture. A large air leak at or near the number one oxygen sensor would also cause a lean mixture. A plugged converter will cause of host of driveability problems as well as set this code. A severely plugged converter will result in the inability to increase rpm when under load. Look for a code such as P0420 -- catalytic converter efficiency below threshold if the converter indicating a faulty converter. A faulty oxygen sensor. This will set a code in itself, however, a faulty oxygen sensor does not automatically condemn the sensor. The code just means that the sensor signal was not within specifications. An air leak or any of the above will cause an erroneous signal. There is a multitude of O2 codes relating to O2 performance which gives a clue to the problematic area. The Mass Airflow sensor will also cause this problem. It would be accompanied by a code such as P0100 -- Mass Airflow circuit malfunction. The Mass Airflow sensor is a hot wire that senses the volume of air entering the intake manifold. The computer uses this information to control fuel mixture. Rusty exhaust systems, cracked exhaust manifolds or damaged or missing gaskets or donuts will cause air leaks.

If you need further help, reach me via phone at https://www.6ya.com/expert/david_1f7d1c330c9dd97d

Mercedes-Benz... | Answered on Dec 31, 2014 | 241 views


Look in your glove box in the owners manual or with the papers you got when you got the car, and see if you have a card or a piece of paper that tells you what the code is. If not you will have to call your local mercedes dealer and give them your vin/serial number and they can look it up for you.

If you need further help, reach me via phone at https://www.6ya.com/expert/david_1f7d1c330c9dd97d

Mercedes-Benz... | Answered on Dec 31, 2014 | 84 views


Freez Out Plugs are located on Both Sides of the Engine Block and also on the Cylinder Head(s)

Mercedes-Benz... | Answered on Dec 06, 2014 | 101 views


If the pump works but no water comes out, then the washer nozzles might be clogged. They're usually unblocked using a small safety pin. Also check the hose line from the pump to the washers as they might be perished. If there's no pump noise then it might be (a) pump fuse, (b) corroded contacts (c) blown pump.

Mercedes-Benz... | Answered on Oct 13, 2014 | 117 views


Broken buy new one. Rockauto

Mercedes-Benz... | Answered on Oct 09, 2014 | 37 views


What year and engine do you have?

Mercedes-Benz... | Answered on Sep 01, 2014 | 38 views

Not finding what you are looking for?
2002 C320 Logo

6 questions posted

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Vehicle Parts & Accessories Experts

Marvin
Marvin

Level 3 Expert

85020 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

xxxxxx xxx

Level 3 Expert

5013 Answers

Are you a Mercedes-Benz Vehicle Part and Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...