20 Most Recent
Apex Digital AT2702 27" TV - Page 3 Questions & Answers
I have an apex tv that has a lock(key symbol) on
Hello
Just try the following to unlock your Apex TV.
Apex TVs use a four digit code to control the v-chip. The override code for many models is 6688. Other sets may not have one, or may have a default code of 1225 instead of an override code.
- To use the override code:
- Hit the MENU key to get to the menus.
- Go down to the SYSTEM menu and hit the right arrow on the remote control.
- Once in the SYSTEM menu, go to PARENTAL GUIDE. It will ask for your code.
- Enter the override code listed above. From here, you can turn on and off different rating restrictions, as well as set a new code.
No matter what the V-chip code is set to, the override code will still work. If you have a blank screen with a red key on the bottom left, simply press the (function or F) button and the mute button at the same time. This will unlock the screen and allow you to view the channel as desired
OK.
No encuentro el coigo para el tv APEX 27''
Hello
Will you please inform me about your Apex Digital TVs fault in English language. At least three ofr four words is enough. I'll try to understand your problem. OK.
T.V. LOCKED
Hi,
Please view this FixYa Tip which outlines the procedure for removing the parental lock when the screen is locked on the Apex TV.
Thanks for using FixYa.
The power went out in our area, and when it came
Red key means that the tv is locked - to unlock it hit the menu button until system is highlighted in red, then scroll down until parental guide is highlighted red. Once highlighted enter the default code of 6688 on the number pad to turn it off.
I have a 32
Hi msvkam
To answer your question;
You probably have the parental lock on,
Here`s the procedure and factory default code to unlock it:
Pass Code Menu
This menu allows you to change the access code for the Parental Guide
functions of the TV set. Pressing the .Menu. key when Pass Code
Control is highlighted. This will turn on or off the Pass Code function. With
the Pass Code function ON, you can also change the Pass Code. Use
the down arrow key to highlight .Pass Code,. then enter the new Pass
Code using the numeric keypad. Press the left arrow key when finished.
1. The factory default pass code of 6688 is also the override code, in case you forget your new pass code.
Hope this help,
Cheers
Apex 40" LCD HDTV
Cablebox? If so, you can try changing the digital output type for the HDMI connection. Most common and reliable format is L-PCM or PCM. If you provide your cablebox model and cable service, you can be better assisted.
I have a older Apex 27
On the original tv remote hold down the "F" (Function) key and press MUTE at the same time. This will unlock the TV.
Good Luck....
How do i unlock my apex tv
Hi
If you have a blank screen with a red key on the bottom left, simply press the (function or F) button and the mute button at the same time for around 10 seconds. This will unlock the screen and allow you to view the channel as desired.
If your TV asks for a 4-digit code or password please enter 3308 or 6688 to unlock the screen or to reset any preset rating levels.
If you have a GT2011J or GT2011S Television, hold the Display button for 10 seconds, it will unlock the screen. If password or code is requested then try 3308 or 6688.
Hope this helps - if so please do rate this answer and thanks for using Fixya.
Cannot get tv to work with digital cable
Okay, here is the deal "Most" providers have there digital signal locked so you have to "rent" there boxes. Okay here is what you need to do, Call your cable company and tell them you have a digital Tv and do not want the box rental. Now most of them will come out and take the lock off the "tap" so you can recieve the signal without having a box. Now a very few will tell you that you need a box now you can fight them with the public utility and see if the budge but if they do not well you might want to try getting a pass threw from radioshack or something.
I am sorry you having issues the firs tthing to do is call the cable company.
Thanks and please leave postive ratings for you 100 percent free answer today. Btw, I’m available to help over the phone in case u need at
https://www.6ya.com/expert/edwy_1a56970cf1ea4620
THE COLOR FADES AFTER A FEW MINUTES AND WHEN YOU
If you are hitting your tv, you have a bad solder connection somewhere either on the neck module or on the main circuit board. If you want to repair this yourself look for solder connections that have black rings, this is an indication that the solder has broken off and the joint needs reordered. It would cost in the neighborhood of 150.00 to fix if you sent it to a shop.
Not finding what you are looking for?