20 Most Recent Apex Digital AT2702 27" TV - Page 2 Questions & Answers

search webside : www.apexdigitalinc.com About Apex Digital Inc. Headquartered in Walnut, CA, Apex Digital Inc., is one of the country?s leading providers and marketers of consumer electronics of High Definition LCD and Plasma Televisions, Home Entertainment Media Devices, Solar Powered Lights and Digital Set Top Boxes. Apex Digital is recognized as one of the fastest growing companies in consumer electronics history. Founded in 1997, privately held Apex Digital?s products are carried in hundreds of retail outlets nationwide. From the beginning, Apex Digital has embraced a total value philosophy, in which lower product costs do not compromise quality or superior customer relations. The company not only responds rapidly to customer needs, but it carefully listens to consumers to better anticipate their future requirements. Growth is driven not only by demand, but also by the introduction of new technologies setting in motion a new revolution in digital information. Apex Digital is moving ahead and further securing its already well-established leadership role in consumer technology. Look for 2009 to be a record year for Apex Digital, with the introduction of expanded product categories in digital media, high definition blu-ray DVD players, accessories, antennas designed with Smart technology and more. Stay tuned! Key executives: David Ji, Chief Executive Officer / Chairman Alice Hsu, Chief Operating Officer M. Jeannie Vogler, Senior VP of Global Sales & Marketing Mailing Address Apex Digital Inc. 301 Brea Canyon Rd. Walnut, California 91789 Customer Service Email: [email protected] OFFLINE OPTIONS Customer Service / Technical Support 866-4APEXGO (866-427-3946) Toll-Free 909-230-4829 Fax 24 Hours a day Accessory Store Orders 866-930-1236 24 Hours a day

This is the tv original tv remote wright?Yes.Tries to take the tv remote aparts,if u can?Yes.Tries take some Q-tips soak with some rubbing alchahols and clean the tv remote PCB board and check the back of the rubbers soles nobs insulater between them,make sure they are not worn out.Take a piece of paper towel soak it with some WD40 and clean those batteries connections like - + to clean for moisture and some rusts.Wait like about 20 mins for the tv remote to dries up and put it back to gether again and replace it with new set of batteries.By doing these steps,the tv remote,will have a great chances it to work again.If u still get the same result after this,most like the tv remote main CPU IC chip is dead.Try website like Remotes.com to buy the tv original remote for the replacement.

Hello
It will be very difficult to unlock your Apex TV without its remote control handset. If you can gather it from some amoung your friends or relatives, who own the same model set, just borrow it form them just to unlock your TV. After unlock, you can use any universal remote control suited for Apex. Proceedings are:
Apex TVs use a four digit code to control the v-chip. The override code for many models is 6688. Other sets may not have one, or may have a default code of 1225 instead of an override code.

1. To use the override code:

2. Hit the MENU key to get to the menus.

3. Go down to the SYSTEM menu and hit the right arrow on the remote control.

4. Once in the SYSTEM menu, go to PARENTAL GUIDE. It will ask for your code.

5. Enter the override code listed above. From here, you can turn on and off different rating restrictions, as well as set a new code. No matter what the V-chip code is set to, the override code will still work. If you have a blank screen with a red key on the bottom left, simply press the (function or F) button and the mute button at the same time. This will unlock the screen and allow you to view the channel as desired OK.

Hello
It is very difficult to get the universal remote code for Apex Digital. I found only one remote control that has codes for Apex; and is Comcast Ondemand Custm-3 Universal remote control. The codes for Apex TV are
0748, 0765, 0767
The proceedings to enter the code will be available with its manual OK.

Hello
Try with these codes. These codes are of universal remote control with Apex Digital.
015 226 037

OK...I paid a whole $50 for an Apex AT2702 that had [undisclosed] vertical zoom, horizontal shift, vertical shift and width issues. Before I raised hell for the person who sold it to me, I decided to first exhaust all alternative solutions.

I found that in order to tweak these settings, you have to be in service mode and must have a service manual which I can email upon request.

BE SURE TO DOCUMENT YOUR CURRENT SETTINGS SINCE ANYTHING YOU CHANGE WILL AFFECT YOUR SET'S PERFORMANCE !!!

1-Reduce your tv volume to 0
2-press the MUTE button on your original tv remote [you'll see "Mute" in red on the screen]
3-AT THE SAME TIME, press MUTE on the same remote and MENU on the tv controls.
This set your tv into service mode [there will be a red "S" at the top-center of your screen.

You'll need the table in the service manual page 47 where there are V-SHIFT, H-SHIFT, V-ZOOM, E/W WIDE default values that will need to be changed. WATCH YOUR SCREEN as you change the values to ensure you don't over do it.

If you have news ticker and sports scores issues, you'll want to be tuned to CNN, FOX, ESPN or whatever to see how your changes are applied.
If you have tv guide problems then tune to that channel or press info and see what happens when you make the changes.

BE SURE TO DOCUMENT YOUR CURRENT SETTINGS SINCE ANYTHING YOU CHANGE WILL AFFECT YOUR SET'S PERFORMANCE.

This has worked for my set and you may attempt this solution on yours at your own risk.
I'm no longer pissed off that I got a bogus tv because it now works just fine and I can see everything!

Good Luck!

Hello
Four digit universal remote codes for Apex TV are:
0214 0216 0215 0401

Direct Code Entry

1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.

Code Search If after trying "Direct Code Entry" your device does not respond, or if your brand is not listed, try doing a search of the code library for your code by following these steps.

1. Manually turn on the device (TV, VCR, etc.) to be controlled.
2. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
3. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks once, then stays on.
4. Press the CHANNEL UP button repeatedly (up to 300 times) until the device to be controlled changes channel. The red indicator blinks, then stays lit.
5. Press and release MUTE to install the code. The indicator light goes off.

Most users will want to store VCR codes under the VCR button, Cable codes under CBL, etc. If you want to store a VCR code under CBL, etc., first follow the procedure for Direct Code Entry and press CBL in step 2 of Direct Code Entry, then enter ANY VCR code in step 3 of Direct Code Entry. Then follow the steps above for Code Search.
Thanks for using Fixya.

hi,

1. To reset you TV's parental control
2. press the MENU key to get to the menus.
3. Go down to the SYSTEM menu and press the right arrow button on the remote control.
4. Once in the SYSTEM menu, go to PARENTAL GUIDE. It will ask for your code.
5. Enter any one of the override code listed bellow .
   

From here, you can turn on and off different rating restrictions, as well as set a new code.

There are two codes for different modes of Apex digital TV try the first one if don't work go for the second one. 6688 , 1225.

No matter what the parental code is set to, the new code will still work. If you have a blank screen with a red key on the bottom left, simply press the (function or F) button and the mute button at the same time. This will unlock the screen and allow you to view the channel as desired

ok

If you find answer, please let us know. Ugh the same thing happened!

Did you ever find this out? Same thing happened to me!

we checked the breakers; they were fine. we unplugged the tv for 10 minutes and still no power.
any other ideas ?

thanks for the prompt response

Hi - Check to see that the power cord is still connected or that the power source has not been shut off.

If it is plugged in, if the power strip is still on and working correctly, and if the breaker the tv is on is not tripped, then I would recommend unplugging the TV for 5 minutes and plugging it back in. Sometimes the tube in the TV can become "overloaded" and needs a brief 'cooling period'. Let us know if this does not work. Thanks!

Hi carlos,

Im assuming the disc youve been trying to use is new. Most people who have that kind of problem may find that the lens need special cleaning by a trained technician who may have to open up the set. For another quick fix, try another dvd cleaner (trust me, the expensive ones are usually better), and also wipe the dvd from the interior to the exterior!

Hope this helps,

kc

Hello
There is a way to unlock your Apex TV. This method will work in most of Apex models. Try this.

Apex TVs use a four digit code to control the v-chip. The override code for many models is 6688. Other sets may not have one, or may have a default code of 1225 instead of an override code.

1. To use the override code:
2. Hit the MENU key to get to the menus.
3. Go down to the SYSTEM menu and hit the right arrow on the remote control.
4. Once in the SYSTEM menu, go to PARENTAL GUIDE. It will ask for your code.
5. Enter the override code listed above. From here, you can turn on and off different rating restrictions, as well as set a new code.

No matter what the V-chip code is set to, the override code will still work. If you have a blank screen with a red key on the bottom left, simply press the (function or F) button and the mute button at the same time. This will unlock the screen and allow you to view the channel as desired
OK.

hi there! there maybe insufficient height on your screen. this will help to locate the problem:
1. Look for by-pass capacitor at the horizontal section of your tv there is possible leak, and try to replace it with the same value by desoldering the defective parts.
2, there maybe an open or leak screen capacitor in the output stage
3. Or an open leak coupling capacitor. thank you.

According to apex its not and does not have a digital tuner the only way this can be high def would be 720P meaning 720 lines progressive scan.

Your aspec Ratio is 4:3 this indeed is a standard TV without a digital tuner so you will need a digital setop box or a digital tuner.

High DEF is not considered digital its conidered how many lines are displayed on the TV. For example 720p, 1080p .

• Silver, 27-inch monaural television; 29.6 x 23.2 x 18.7 inches (W x H x D)
• Front-panel audio/video input accommodates a camcorder, VCR, or gaming console
• 3 rear AV inputs (including 1 S-video input), 1 RF antenna input
• Channel scan, channel recall, closed-caption display
• Offers V-Chip parental control, sleep timer, auto-off, and a full-function remote control

Technical Details

• Brand Name: Apex
• Model: AT2702
• Display Technology: CRT
• Display Size: 27 inches
• Image Aspect Ratio: 4:3
• Speakers Included: 2 speakers
• Height: 18.7 inches
• Width: 29.5 inches
• Depth: 23.2 inches
• Weight: 88.2 pounds

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620

tnrtytny

Hello
I've the manual you need with me in Adobe Acrobat Format for Apex AT2702. But I can't upload it to you through this site, as it exceeds the upload capacity. If you are interested send me your emailaddress to my email address geiven below, or send it through Fixya. I'll send it back to you as an email attchment. Please mention the model number once again in the mail. OK.

Hello

Apex TVs use a four digit code to control the v-chip. The override code for many models is 6688. Other sets may not have one, or may have a default code of 1225 instead of an override code.

1. To use the override code:
2. Hit the MENU key to get to the menus.
3. Go down to the SYSTEM menu and hit the right arrow on the remote control.
4. Once in the SYSTEM menu, go to PARENTAL GUIDE. It will ask for your code.
5. Enter the override code listed above. From here, you can turn on and off different rating restrictions, as well as set a new code.

No matter what the V-chip code is set to, the override code will still work. If you have a blank screen with a red key on the bottom left, simply press the (function or F) button and the mute button at the same time. This will unlock the screen and allow you to view the channel as desired
OK
Happy New Year