Jack Lalanne s Pro Stainless Steel Power Juicer - Page 4 - Answered Questions & Fixed issues
Brief power outage. Light timer not working.
If there was a brief power outage and your light timer is not working, there are a few steps you can take to troubleshoot the issue:
- Check the timer settings: Make sure that the timer is set correctly and that the time and program settings are accurate. If the timer has lost power, it may have reset and will need to be reprogrammed.
- Check the power source: Ensure that the timer is receiving power by checking the outlet or circuit breaker that it is plugged into. If the outlet or breaker has tripped, reset it and try again.
- Check the timer battery: If your timer has a battery backup, check the battery to make sure it is still functional. If the battery has died, replace it with a new one.
- Reset the timer: If none of the above steps have worked, try resetting the timer to its default settings. Refer to the user manual for instructions on how to reset the timer.
If the above steps do not resolve the issue, it's possible that the timer has been damaged due to the power outage. In this case, you may need to replace the timer or seek the assistance of an electrician to diagnose and repair the problem.
3/19/2023 3:42:07 PM •
Hardware &...
•
Answered
on Mar 19, 2023
•
173 views
Would you please explain how to bypass the timer on a Smeg A2-2 Oven.
It is not recommended to bypass the timer on your Smeg A2-2 oven, as the timer is an important safety feature. However, if you still want to bypass the timer, here are the steps:
- Turn off the power to the oven at the main breaker.
- Locate the timer wires. In your case, there are 2 black pairs, 1 red pair, and a single white wire.
- Determine which wires are connected to the timer. These wires will be labeled "timer" or "clock."
- Cut the timer wires close to the timer unit.
- Strip the ends of the wires back about 1/2 inch.
- Twist together the wires that were previously connected to the timer.
- Cover the twisted wires with a wire nut.
- Wrap the wire nut and wires with electrical tape.
- Turn the power back on and test the oven.
Again, it is not recommended to bypass the timer on your oven, as this can be dangerous and may void your warranty. It is recommended to consult a professional technician or the manufacturer before attempting any repairs or modifications to your oven.
2/23/2023 11:26:32 AM •
Hardware &...
•
Answered
on Feb 23, 2023
•
41 views
How to set timer to operate properly
To set your Garrison timer model 52-8817-6 to operate properly, you may need to adjust the time and the mode settings. Here are the steps you can follow:
- First, set the correct time on the timer. To do this, locate the "TIME" button and hold it down until the hour digits start to flash. Use the "+" and "-" buttons to adjust the hour, then press the "TIME" button again to move to the minute digits. Repeat the same process to set the correct minutes.
- Once you have set the correct time, you can then set the mode. To do this, locate the "MODE" button and press it until the desired mode is displayed. In your case, you will want to set the timer to the "PM" mode.
- Finally, set the on and off times for your device. To do this, locate the "PROG" button and press it to enter programming mode. Use the "+" and "-" buttons to set the on and off times for each day of the week.
If you have followed these steps and your timer is still not operating properly, you may need to consult the user manual or contact the manufacturer for further assistance.
2/15/2023 6:09:29 AM •
Hardware &...
•
Answered
on Feb 15, 2023
•
90 views
Wiring diagram for Mastercraft RT550B rotary tool
The black line wire connects to the negative (-) terminal on the circuit board. You may find wiring diagrams for specific products online, or you can reach out to the manufacturer for detailed instructions.
1/29/2023 10:32:58 PM •
Hardware &...
•
Answered
on Jan 29, 2023
•
51 views
Radio cobra 200 gtl n9 transmite ni se mueve la aguja donde le mueve pa transmite
Suena como si pudiera haber un problema con el transmisor de su radio Cobra 200 GTL N9. Es posible que la fuente de alimentaci?n de la radio no est? proporcionando suficiente energ?a al transmisor, o que el transmisor no est? conectado correctamente. Debe verificar la fuente de alimentaci?n para asegurarse de que est? conectada y proporcione el voltaje y la amperaje correctos a la radio. Tambi?n debe verificar todas las conexiones entre el transmisor y la radio, incluidos el cable de antena y el cable del micr?fono. Si las conexiones est?n seguras y la fuente de alimentaci?n funciona correctamente, entonces el problema puede estar con la radio misma y es posible que necesite ser atendida por un profesional.
1/4/2023 1:25:23 PM •
Hardware &...
•
Answered
on Jan 04, 2023
•
44 views
I need a manual for CRMC-A310JBEO For Sharp Air Conditioner Remote Control
The Sharp Air Conditioner Remote Control CRMC-A310JBEO comes with two timer-related functions: TIMER ON and TIMER OFF. To set the timer on the remote control, press the Timer button, then use the Temp + or Temp - buttons to set the desired time. Wait 3 seconds, then the timer function will be activated. You can turn off either function by setting its timer to "0.0h".
1/24/2024 8:44:06 AM •
Hardware &...
•
Answered
on Jan 24, 2024
•
397 views
I have an Arlec PC699GB timer. It is not following the weekly programme which I have set it to do.
It sounds like there may be an issue with the timer itself. Some things you can try include double-checking that the timer is set up correctly and ensuring that the power supply to the timer is stable. You can also try cleaning the contacts on the timer, as dirt or corrosion on the contacts can prevent the timer from functioning properly. If these steps do not help, it is possible that the timer is malfunctioning and may need to be replaced. If you have tried these steps and the timer is still not working as expected, you may want to consider contacting the manufacturer or a professional for further assistance.
1/4/2023 1:17:19 PM •
Hardware &...
•
Answered
on Jan 04, 2023
•
190 views
Operating instructions for ekco timer
Hi,
It seems like your device is being sold on websites like amazon and ebay. Your best move might be to request the instructions from one of those sellers and ask them to send it to you as an individual product. Otherwise, you might have to reach out the librarian at a local college or technical college to ask if they could provide you the instructions that you're seeking.
Thank you.
12/27/2022 2:02:12 AM •
Hardware &...
•
Answered
on Dec 27, 2022
•
45 views
Not finding what you are looking for?