Jack Lalanne s Pro Stainless Steel Power Juicer - Answered Questions & Fixed issues

auto parts stores usually have assorted ones. Take the old one out and have them compare

Jack Lalanne s... | Answered on Aug 27, 2014 | 777 views


Hardware &... | Answered 23 hours ago | 19 views

A router, sander, hand-sanding or a hand planer can all accomplish this task.

Hardware &... | Answered 3 days ago | 13 views

Google (brand)(TM1627L)(manual) without parens for instructions.

Hardware &... | Answered on Oct 17, 2019 | 28 views

I had a similar unit. The solution is in the programming. Read instructions carefully

Hardware &... | Answered on Oct 04, 2019 | 40 views

does your wiring look like what is shown in the instruction papers?
From your description, it does not sound like it. There is no white wire attached to the switch.
What type of bulbs are you connecting to? These require bulbs that can pass small amounts of current when off == incandescents and florescent. They may not work with LEDs.

Hardware &... | Answered on Oct 04, 2019 | 36 views

I am not a heating expert so take this with a grain of salt.
IMHO, a sooty burning oil burner (which kerosene is used in) is due to too much fuel or too little air. An oil burner consumes oxygen, therefore ventilation is required. A direct vent supplies makeup air and provides and exhaust path. Kerosene comes in a couple of different grades. K2 is generally used for heating.
SO, insure you have the correct type kerosene. Inspect your direct vent to insure it is drawing in air from the outside easily. Insure your control is not supplying too much kerosene.
The flame should not be red - that is a definite indication of too little air/too much fuel. If it is very blue, it may get blown out. Your manual should show you the perfect flame color.
If you are smelling kerosene, that would be a good indicator that something is wrong with your direct vent. Any leak between the exhaust section and the makeup air section will cause this. Reinstall the vent and insure the directions are followed. Moving the vent after installation is perfect for breaking the seals and creating the problem. Have you had any earthquakes lately?

Hardware &... | Answered on Oct 04, 2019 | 34 views


Hardware &... | Answered on Oct 04, 2019 | 22 views

You might be able to adjust the glides. An easier way would be to make the cabinet tilt slightly rearward by shimming the front of the cabinet at the bottom.

Hardware &... | Answered on Oct 03, 2019 | 63 views

There should be a diagram inside the battery compartment.

Hardware &... | Answered on Sep 29, 2019 | 32 views

Change it to military time. Then set alarms at 05:00 and 17:00.

Hardware &... | Answered on Sep 16, 2019 | 30 views

Google (vigoro)(271-687)(manual) without parens.

Hardware &... | Answered on Sep 08, 2019 | 30 views

Not finding what you are looking for?
Jack Lalanne s Pro Stainless Steel Power Juicer Logo

2 questions posted

Ask a Question

Usually answered in minutes!

Top Jack Lalanne Hardware & Accessories Experts

Gene Haynes

Level 3 Expert

5353 Answers

Brad Brown

Level 3 Expert

18108 Answers

Tom Chichester

Level 3 Expert

54195 Answers

Are you a Jack Lalanne Hardware and Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides