20 Most Recent NetGear WN2000RPT Repeater - Page 9 Questions & Answers

0helpful
1answer

Can I temporarily disable wifi on a netgear 67 router and leave wired connections enabled?

Yes! There should be a switch on the top of the router that allows you to turn on/off the wireless feature. A corresponding LED will indicate when it is lit that the wireless is active and when off that the wireless feature is off.
11/24/2015 2:29:33 PM • NetGear... • Answered on Nov 24, 2015
0helpful
1answer

IMac, canon mx860, netgear router, error code 306.

  1. In iTunes, choose iTunes > Preferences (Mac) or Edit > Preferences (PC).
  2. Click the Advanced tab.
  3. Click the "Reset cache" button.
  4. Click OK and see if the issue is resolved.
Adjust Parental Controls in iTunes:
  1. Open iTunes.
  2. Access iTunes preferences:
    1. On a Mac: From the iTunes menu, choose Preferences.
    2. On a Windows PC: From the Edit menu, choose Preferences.
  3. Click the Parental Controls tab.
  4. Remove restrictions on Parental Controls.
visit the CBR Tech Solutions
11/10/2015 3:17:44 PM • NetGear... • Answered on Nov 10, 2015
0helpful
2answers

Firmware upgrade

Why the need for firmware upgrade? The power light is green, it is working, the problem lies with your internet connection. 1. Check the cabling. 3. Check with your ISP as to what the problem is. 2
11/4/2015 7:30:12 PM • NetGear... • Answered on Nov 04, 2015
0helpful
2answers

Advanced settings

http://www.downloads.netgear.com/files/GDC/WNCE2001/WNCE2001_UM_24Sep10.pdf Chapter 2 has advanced settings Give us more information on what you are trying to set up and we may be able to assist you more. Happy tinkering !
11/4/2015 7:28:46 PM • NetGear... • Answered on Nov 04, 2015
0helpful
1answer

How do i change the password so people can't connect other than me?

The category is listed as Network and Wireless Adapters, but the question is leading to an answer regarding routers. The router in a network is what allows connection and assigns IP addresses. The router uses encryption and a security passkey (password) to allow uses to connect. You would need to log into the router using the administrator ID and password, go to the Wireless page and change the access password. ALL USERS would then need to reconnect using the new password.
10/30/2015 2:47:23 AM • NetGear... • Answered on Oct 30, 2015
0helpful
1answer

What is the security key

It's the number on the bottom of the router, marked "key".
9/20/2015 9:18:21 AM • NetGear... • Answered on Sep 20, 2015
0helpful
2answers

Where to enter password

To log into your router's Admin web interface:
  1. Using a computer that is connected to the router with an Ethernet cable, launch a web browser. Examples of web browsers include Internet Explorer, Google Chrome, and Mozilla Firefox.
  2. In the browser address bar, type http://www.routerlogin.com. You can also try the following:
    • http://www.routerlogin.net
    • 10.0.0.1
    • 192.168.1.1
    • 192.168.0.1
9/3/2015 8:47:00 AM • NetGear... • Answered on Sep 03, 2015
0helpful
1answer

Have NETGEAR router wifi trying to connect a tv in bedroom to Netflix but when signing on to wifi it comes back authentication problem to many people on wifi. What can I do to fix this?

Get another router, this is a common problem with Netgear, life span is too short. Try TP-LINK, you'll be surprise.
8/14/2015 2:02:18 AM • NetGear... • Answered on Aug 14, 2015
0helpful
1answer

My password will not connect me to wifi

compare the password on your phone to another device that uses the same wi fi router or log in to router and have it show the wi fi password and compare it to the password on the phone make sure the phone is using router name ssid
7/22/2015 12:00:27 PM • NetGear... • Answered on Jul 22, 2015
0helpful
1answer

How can I get my netgear router to connect to my LG flatscreen tv so that I can watch Netflix?

Hey! You shouldn't need to manually enter in the network name. Refer to your documentation that came with your router for the default network name (SSID) and passphrase. As always, I recommend you change these when you can to something more secure. Select your network in your network settings on your TV, input the password, and it should connect. If you can provide the model number(s) of the TV/router, I can guide you a bit further in the right direction. Hope this helps!
6/23/2015 5:18:16 AM • NetGear... • Answered on Jun 23, 2015
0helpful
1answer

How to used netxbook tablet when sleeps

You can't use nextbook tablet when it leeps or when you sleep. Please ty to reformulate your queston so others might answer you
6/2/2015 2:41:33 AM • NetGear... • Answered on Jun 02, 2015
0helpful
1answer

I purchased a new netgear router and installed according to directions, but my roku says I am not connected

unplug your roku and plug back in then search for wireless then put in your new password
5/27/2015 11:16:08 AM • NetGear... • Answered on May 27, 2015
0helpful
1answer

What internet access speed is my netgear 60 running?

That depends on MANY factors, so you can only tell by MEASURING it in a live environment. Go to the below address and select "Begin Test" http://www.speedtest.net/ http://www.speedtest.net/
5/18/2015 9:49:06 PM • NetGear... • Answered on May 18, 2015
0helpful
1answer

Turn off security

You can do this. Sign in to the router and turn security off.
5/11/2015 9:16:22 PM • NetGear... • Answered on May 11, 2015
0helpful
1answer

I can not access to my NETGEAR52 router anymore

Its the wire plug or the wire itself if wireless router. And your land phone working fine. Call the internet provider company to fix this for you
5/7/2015 3:07:32 AM • NetGear... • Answered on May 07, 2015
0helpful
1answer

I need to reset my password

look under your router for your routers IP address now open explorer and type that into the address bar at the top of the page. you should now have a name and pass word to put in to enter your routers settings ( passwords should be in your routers manual )
4/26/2015 2:51:30 PM • NetGear... • Answered on Apr 26, 2015
0helpful
1answer

My netgear 81 is on on my phone. It was on my laptop now it says not connected cant find netgear but yet wen I try to add it says already on this laptop. Troubleshooting says cant find any netgear hel

Assuming you are using Windows 7 or later. Right Click on the Network Icon in the Status Bar Go to Network and Sharing center Go to Network and Sharing Center then look upper left side and choose "manage wireless connections" you can rename or adjust the SSID for each wireless connection there. You can get rid of the extra wireless adaptors by going into Control Panel>Device Manager, go to "view" then choose "show hidden devices" after that go to network adaptors and you should be able to delate any extra network adaptor entries.
3/25/2015 7:48:17 PM • NetGear... • Answered on Mar 25, 2015
0helpful
1answer

My netgear49 will not connect with my roku

Yes.
3/22/2015 12:34:37 PM • NetGear... • Answered on Mar 22, 2015
0helpful
1answer

How to setup PLDT DSL with Netgear DGN2000

Hi, Follow the below steps to configure the router:

1. Connect the cable/phone line coming from Internet Service Provider to the WAN port of the router(isolated port).
2. Connect the computer to the router using any one of the 4 available ports.
3. Open the browser(Internet Explorer or Mozilla Firefox).
4. Access the router (usually http://192.168.0.1).
5. Login to the router (Username = admin Password = password unless you have changed it).
6. Click 'setup wizard'(at the top of list) from left menu.
7. Select yes and click next.
8. It should give you a "PPPoE Detected" and then click next.
9. Enter the login and Password of ISP click apply.
10. Once the settings are updated click on 'router Status' and click on 'connection status' button(at the bottom of the page).
11. Click on connect button.
12. Connecting to server should show 'connected'.
13. If you receive 'CHAP authentication failed', close the 'connection status' window and click on 'Basic settings'. Check the login and password for ISP and apply the setting again.
14. Open up another browser window and try to access internet.
I hope this information allows you to resolve this issue.

If I have helped you, please help me, and rate this suggestion the highest FixYa rating. If you cannot rate this post with the highest rating, then please comment to this post and I will try to help you further.

Regards
Anand
3/20/2015 10:54:46 AM • NetGear... • Answered on Mar 20, 2015
Not finding what you are looking for?
NetGear WN2000RPT Repeater Logo

80 questions posted

Ask a Question

Usually answered in minutes!

Top NetGear Computers & Internet Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a NetGear Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

NetGear Computers & Internet

  • NetGear Computers & Internet

Most Popular Question

lost installation disc need help

  • Computers & Internet
Loading...