Top 20 HEWLETT-PACKARD Hewlett Packard P1102 Laser Printer Questions & Answers

power on printer after printer is in ready state press and hold down x cancel button until ready flashes then release you will get config page

At the control panel, press and hold the cancel button until the ready light starts blinking, and then release the button.

Replace toner cartridge., toner above to empty

Configuration page denotes total gape count.. Press menu button...scroll to information..enter...scroll to configuration page...enter..

I take it you are refilling the toner cartridge...

Switch the printer off.

Press and hold the green button on your printer and turn the printer on. You will see that the lights flash for a moment and then turn off. After a few seconds, the attention light will turn on followed by ready light and the green light. Keep pressing the green button. In a few seconds, the attention light and the ready light will turn off.

Push the toner rotate button while you continue pressing the green button. As you briefly push the toner button, you will see the light flashing. Release both the toner button and the green button.

Repeatedly push the red button (cancel button). Now all the working lights on the printer will turn off.

Open and close the lid of HP printer once. The light will start blinking.

Press the green button. Your HP toner cartridge chip will be reset.

Hi Anonymous, I want to help you with your question, but I need more information from you. Can you please add details in the comment box? What printing problems are you having?

Only way to replace formatter board..

it dependes if you have local wifi where your HP printer is connected. If yes, you only need to install HP ePrint app. After you start the app ignore activate printing via hp cloud, you don't neet it. If you are with your Android on the same WiFi your app will identify the printer on the network and you only need to indicate the photo or file. Open it and print. Tha'ts all.

Here's a solution HP has that explains how to print wirelessly from iPhone for that printer. Review the different options and find the solution that works best for you. HP Printers and Supported Mobile Printing Solutions I am an HP employee.

Press and hold the red X button (cancel) until the green light starts to blink.

it sounds like your collection assembly is full. this is not something you can do anything about. it must be replaced and it will be costly. you are probly better off to replace it

You need to buy genuine cartridges. Take them back to the dealers and demand genuine cartridges that is if you did not force the cartridges into the slots. If you are printing blank sheets then change toner cartridges.

If IT SHOWS the HP LOGO AND NEVER COMPLETE THE INITIALIZATION; it can be FORMATTER BOARD (rplace it), could TRY TO UPDATE THE FIRMWARE AT HP SITE.

You cannot generally reset a serial number for a machine, as that is a prime identifier for the machine that you are using. Can you please clarify the question a little bit? Why do we need to change the serial number?

This page provides some solutions for slow printing for that Officejet Printer. Slow Printing HP Officejet 4500 Desktop All in One Printer G510a HP... I am an HP employee.

Try another cyan toner cartridge. Let me know what happens. Print Quality Troubleshooting Tool for HP Color LaserJet CP4025 CP4525

Flashing Question mark is attention light/ paper tray set wrong or paper jam either in user or under toner or in front right after pickup roller or cover open switch is on making contact or toner switch check roller for wear my not be picking up paper last paper tray gets stuck in left side front check it

I'm assuming you have the correct drivers loaded and correctly configured. Set power switch to off. Unplug it for 1 minute. Plug it back in. Turn it on. If it still won't work, I suggest replacing the power supply. If it still won't work, I suggest you replace it.

Go to this web site:www.feedroller.com

Hello, In many printers the pick up roller is not replaceable. In such cases the printer has to be serviced. May i know the printer model name/ description to assist you better ?