20 Most Recent Epiphone Sheraton II Guitar Electric Hollowbody - Page 2 Questions & Answers

That serial number was used more than once. If it has 'Made in USA' on the headstock, it was made at the Bozeman Plant, MT, USA on July 21st, 2000. Otherwise it was made in Korea in March, 2002.

Check Ebay completed listings.

That guitar was made in Korea in August, 2004

We don't do that here, check with them...

Your guitar was made at the Qingdao Plant (Epiphone), China in April, 2016

Does this guitar have a esonic 2 system, if so the other pickup is piezo pickup located under the saddle, there should be two wires coming from the pre-amp just remove the pre-amp from the body and make sure that the two wires are still plugged in and attached to the pickups, these are plugs like a small headphone style plug, just check these and the wires are held in by small wire clips,one of the wires may have came out of the clips...hope this helps I will look for a schematic for you and post it if I find one...Good Luck!!!

I think it was made at the Muse factory in China in Jan 2011

I think it is a 1965. As to value, it would be worth US$3000 - $4000 depending on condition. There was one being sold for around US$5500, in mint condition. You might want to get a professional appraisal on-line for an instrument like that one. https://guitars.com/appraisals

2002 made in China

Not the model, as Epiphone did not assign serial numbers that way. Your guitar was made at the Saein Plant, Korea, in March, 2000. They made a lot of Epi Les Paul models tho.

Finally caught up to this. Your guitar was made at the Fuji-gen Plant, Japan in 2006

Your guitar was made in Korea, September, 1989. In good condition it would be worth about US$800. In rare colours like white, about US$1000.

Samick Plant Korea, 1985,1995, or 2005, August, Production # 7373. Good question, the serial number only gives you the above information. I hope this helps some. Samick made some good guitars!

Your guitar was made in Korea in December, 2000. The serial number does not give the model, so a value can't be estimated. Post the model type in comments if you wish. .

That appears to be correct.

What would you like to know?