Top 20 Hitachi 320GB LifeStudio 25 Mobile external drive Platin 0S02706 USB 20 Hard Drive Questions & Answers

Even though the drive is recognized, it is probably not formatted, which means you can't store any files on it yet. You will have to format it before any data can be written to it.

1. Open Control Panel > Administrative Tools > Computer Management

2. In the LEFT PANE, find the "Storage" heading, then find "Disk Management" and click it. Windows will show you a graphical representation of all of the hard disks installed in your system. Find the new Hitachi drive in the UPPER-RIGHT PANEL, and RIGHT-CLICK it.

NOTE: BE SURE YOU CHOOSE THE CORRECT DRIVE IN THIS STEP! If you choose the MAIN drive, the one where Windows is installed, you could DESTROY THE DATA on it and render your system UNBOOTABLE. YOU'VE BEEN WARNED!

3. When you RIGHT-CLICK on the NEW HITACHI HDD, you will see the "Format..." option. Click the "Format..." option and follow the prompts to format the new HDD.

4. When the FORMAT operation is finished, you will be able to use the new HDD to store files.

There are MANY tutorials available which explain this process; read the section titled "Formatting a Secondary Hard Drive" on the following page for more details:

http://www.ehow.com/how_6026_format-hard-drive.html

Good luck; let us know how this turns out.

microsoft.net framework, is a downloadable resource for your computer (used to be downloadable from windows update) if you install this before trying to install life studio, you shouldn't run into this problem. Thank you for downloading

Use Dos command to change all incorrect files to correct file name.

Formatting will erase everything on that drive. If you can accept loosing that, do the format and see if it works. If it does not fix it, you need a data recovery expert. Few computer professionals can do that kind of work.

What is the exact model number?

http://www.the-manuals.com/hitachi-lifestudio-2-tb-manual-manual/find this.

First - re-seat the hard disk and reboot the computer. If the computer does not boot up then reboot and go into the BIOS configuration to see if the BIOS detects the hard drive. If it doesn't detect the hard drive then it could be faulty. Then the hard drive needs to be replaced in the computer/laptop, Windows installed and the computer or laptop's device drivers plus your programs etc. to get a functioning computer/laptop again.

Found this,,,,, https://www.justanswer.co.uk/consumer-electronics/c5uh2-hitachi-xl500-won-t-connect-hear-running-no-light.html hope it helps.

You will have to use the HDMI port on the mac. provided you have a HDMI input in the projector

use this? it can backup anything. https://www.2brightsparks.com/download-syncbackfree.html

BENJAMIN, Your message does not qualify as a question or query for a problem, try somewhere else DO NOT MAKE THIS SITE WITH YOUR GARBAGE Take your GARBAGE to another Side Your message qualifies as SPAM

buried in endless spam are you. does it fail on 2nd PC???????????????????????????? but yes, I am the MVP of external HDD< I build my own. Have over 5 here for Backups . lots of causes, for sure bad drive, or missing drivers.. bad HW hardware or BAD software SW. Missing 12vdc 2amp power pack>, lost or using wrong one. when pack above does the HDD spin? usb connected to PC. NO PC stated, NO OS stated, windows/chrome/Linux/android? its at lease 10 years old , see posts back that far. not good old HDD,this old. sold during W7 era. 2009. The drive has 3.5" HDD that needs lots of power (Amps) to start up that big motor inside, and is first thing to learn . 2amps it needs, ok? so if pack is missing it will never startup on any USB port, not rated for 20x standard USB load factors. some laptops only do 0.1amps (100mA) and are useless to startup any hdd motor of any kind. see why here. and see a better extremal solution cheap.! $10 http://www.pcdied.com/external-hdd.html

Tried googling for the answer but couldn't find it. Try calling an it support company, I'm sure they'll help you out for free. Perhaps you can try https://www.computersinthecity.co.uk/, they have been helpful to me in the past.

No. http://www.hitachidigitalmedia.com/en-gb/discontinued-products/plasma-tvs/42-106cm/42pd7200

Hi, What is the router/modem model number? Have you tried a different cable? Have you gone into the menu, networking and setup ?

purchase a Roku box

Maybe this will work for you. https://ibm-hitachi-drive-fitness-test.en.softonic.com/

Try to right click the listing. you should get a dropdown where you can repair of reinstall the drivers

try downlolading the driver compatible with win 10 os

See if it supports chrome or firefox then install either then try it.