20 Most Recent
Hitachi 51F510 51" Rear Projection HDTV-Ready Television - Page 9 Questions & Answers
My hitachi 50v525e won't turn on I have sound but no pic I have blue flashing light and tv shuts off by itself...Do I need an input board or is it called a mother board?
I had that problem once. Read online somewhere to change the projector bulb and watched someone on YouTube do it. Straight forward and quite simple to do yourself. You can order the bulb in the metal cage it comes in and swap it out that way; never touching the bulb, but that's more costly. Even more costly if you bring in a TV tech to do it. The video I watched - the guy just got the bulb only and used the existing metal cage just unhooking the old one and putting in the new one. I ordered just the bulb itself off of Amazon for about $40 and did it myself the same way he did. If you do it this way just be sure not to touch the bulb surface with your hand as skin oils can cause the bulb to burn out much quicker. I used/wore a 10 cent pair of disposable latex gloves when I handled the bulb. The panel were the bulb is located is on the front of the TV, near the lower left side. Very simple to do. Just google/Youtube the model number and you should find videos on how to do it yourself.
7/24/2022 10:05:12 PM •
Hitachi...
•
Answered
on Jul 24, 2022
Hi, I have a Hitachi TV (43HK6T74U).
The connection for the HDMI connection from the cable box to the TV is the main cause of either a pink or a purple screen. This can be solved here by following these instructions The first step is to make sure that both of the sides of the HDMI cables are properly plugged in as firmly. The second step is to power-cycle the All of the digital unit by removing the power cord from the unit and from the wall.
5/27/2022 3:13:06 AM •
Hitachi...
•
Answered
on May 27, 2022
Hitachi le49s508 does not switch on easily...keep having to unplug and try again
Fault with the main power supply [SMPS] board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts.
http://electronicshelponline.blogspot.com/
It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.
Type in the brand name of your device [exclude the model number] at the search box at the right column to get gathered related posts.
11/6/2021 5:45:59 PM •
Hitachi...
•
Answered
on Nov 06, 2021
Not finding what you are looking for?