20 Most Recent Hitachi C21-FL21F 21" TV - Page 9 Questions & Answers

Just take the battery out from its compartment. The remote control will reset itself. Insert the batter after some time. http://remotesearch.blogspot.com/

change the pixel settings

It does sound to me like the T-Con. If you can change the channels even though you can't see the picture then that's is a T-Con problem. Especially as you can see the lights. Before replacing any of the boards check for bad solder joints and poor connections between the boards, as the TV does sometimes function right.

I have same problem in my a/ c does anybody knows how too repair. It

Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. http://homenol.blogspot.com/ http://electronicshelponline.blogspot.com/ If blinks continue without any pause, the main board is faulty. Search the site by type in the "brand name" to your device, [Exclude the model number] in the "Search box at the top right of the display window of the Homepage" to get gathered related posts./

These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand. http://electro-medical.blogspot.com/

Try these. Hitachi 11145, 10145, 10151, 11960

We have no info on parts.

If you are using an HDMI cable to connect the DVD player to the TV, it is possible the contacts on the cable are damaged or corroded which will cause the colour to change or disappear. The easiest way to check this is to just buy another cable and to try it.

Contact the authorized service center for Hitachi, to get more details.

Here is a link for codes http://codesforuniversalremotes.com/remote-control-codes-for-hitachi-tvs/ __ didn't see specific manual BUT a general programing is on this site: http://tv.manualsonline.com/manuals/mfg/hitachi/hitachi_universal_remote_product_list.html I’m happy to help further over the phone at https://www.6ya.com/expert/mike_316638c836088218

The led driver may be on the main board or on it's own board. Led strips don't fail all at once so if you had a dark area of the picture then I'd suspect a led strip. TV Parts Universal TV Stands DLP Chips ShopJimmy This is the place to get parts.

TV Parts Universal TV Stands DLP Chips ShopJimmy They will have all the parts you need.

either bad tcon board or panel

Its in settings but can be hard to figure out what its saying if its in another language, sometimes a factory reset is the best way to go

go to menu or setting and you should find the language part so you can change it. have a good look should have a list to pick from