20 Most Recent
- Page 5 Questions & Answers
Car radio WX-920bt will not come on. I have power on yellow wire but will not come on
Often the yellow wire is for the clock to keep the clock running even if the radio is turned off. It is not meant to power the entire radio. The yellow wire is usually always on even if you turn off the key switch. You also need to have a ground or negative terminal connected to the radio, and also a 12 volt positive wire that is switched on and off by your key switch. The color of this wire is often red, but could be other colors depending on your vehicle.
on Apr 08, 2019
Does anyone know why a Bearfoot 3 cb amplifier is not working ?
It obviously works, so it is NOT a fuse. The most likely cause is a poor antenna connection. This happens often. Unscrew the antenna. Use a continuity meter to check check each connector. Such as the one that screws into the radio, if the continuity meter "beeps" the connector is "grounded" and was installed improperly. Do not use that antenna until you fix it, you could blow the transmitter by using a "grounded" connector. Test it exactly the same way without the antenna attached. If you are not used to installing connectors, you could easily go through 2-6 before you get the hang of them.
on Apr 05, 2019
Not finding what you are looking for?