Top 20 Canon imageRunner C3100 Copier Questions & Answers

You may download the Canon driver from http://www.usa.canon.com/cusa/support/office/color_imagerunner_copiers/imagerunner_c3100_c3170/imagerunner_c3100#DriversAndSoftware

Clear Admin Password Get Full AccessYou need to get access to service mode settings which a printer technician should know then follow below instructions>COPIER>FUNCTION>CLEAR>PWD-CLR Headlight PWD-CLR and hit OK

Drum motor error

Check the connector and replace the motor

A E000070-0002 deals with the transfer belt. I believe it deals with the two tension arms, one may be broken...... It is not easy to get the unit out of the copier.... Good Luck

did'nt got ur error. try to remove the boot rom and reinstall it .and do the same with the hdd ,it may solve the prob.if not try to write more about it

U can connect through a network or even as standalone printer through usb port.In network connect the machine to the network through rj 45 cable and then load the driver in the server and access it from there .
Through usb simply run the driver when it asks to connect the machine connect the usb lead and rest it will take care of.

Hello, sounds like a fault with the drum or fixing unit. Also try cleaning the drum sensor.Remove the drum and locate the sensor along the white plastic bar.Clean with a cotton rag so that you dont create static electricity.Failing that, try changing the drum. And if all that fails contact your local Canon service centre. I hope I have helped.

hi every one i have canon ir 2030 but i cant install the scanner of it if you have any slution please let me know

you cooperation will be higlly appracaited in advance.

please mail to me @ [email protected]

sir i have a canon 6570 image runner
0001 code is coming again & again
plz ask me what i do

check the hopper motor ,hopper connector and developer connector .

Waste toner bottle full, open front door, one screw, make sure small cut out in the neck of the bottle is clean afterwards.

Click here to visit Official drivers and support for Canon IR-2020 Select the Operating System you have on your PC, select language and click 'submit' to download the required drivers
Let me know if any further clarification/ assistance is required.

Good Luck!
Appreciate generously, if the solution could have been of any help!
CreativeTECH

Hi. you have to take out the drum unit and clean 2 sensore under the transfer belt unit

one side light

Reader communication error

Check on connection between the reader controller
PCB and the main controller PCB, Check on the
reader power supply

This error can occure during transfer of machine, the boards are conected with one slot.Try to adjust and reconnect boards.

Needs a new fuser unit, then a ERR clear.

it can happen because of display problem

the itb belt has gone bad. it could be torn or the flags on the inside of the belt could be dirty and the sensors are not detecting its proper position.

First off would that be a irc3100 and if i am not mistaken that the e0020-01xx means that the magenta developer is having issues and either needs to have the toner starter placed or the developer it;'s self needs to be replace. Unless you know how to work on this machine i would suggest you place a service call it is not a real easy fix

0007 is besically the fixing problem.