20 Most Recent Canon imageRUNNER 400S Copier - Page 6 Questions & Answers

805

roblem : 
The machine displays an E674 code. This may be followed by an E677 code when the Fax pcb is removed. The imageRunner also has a Print Board installed. 

Solution : 

With the Fax Board and Print Board installed an E674 code occurred. When the Fax Board was removed an E677 code then occurred. 
Try removing the PDL Interface pcb for the Print Board from the copier. Reinstall the Fax Board, if the E674 code does not occur and the copier is capable of sending and receiving faxes, then replace the PDL Interface pcb because it may be faulty and causing the two E codes; E674 for faxing and E677 for printing.

E677 on iR400 is the otional printer board assembly was trouble. It must be change. Try this : replace your optional printer board assembly, the problem was correct? The other day you must bought optional printer board assembly. God Bless You....?!

right cover sensor switch is not pushed well, pls check well

hi sir my xerox machine ir 400 the error code e0110 so now please help me

how to reaper door front cover swich

Either you misunderstand this message or the switch which says the door is closed is not doing so.

Hi

Error E005 means the fuser cleaner roller has run out & may need a replacement. If the error is false it will disappear by following the reset procedure. To clear this error code press * 2 and 8 * in that 2&8 are pressed simultaneously. Go to the web counter and clear the counter back to Zero (0). Machine will now restart your machine & error code will disappear. If this doesn't help then try clearing both web counters in service mode, COUNTER>MISC>FIX-WEB> and COUNTER>DRBL-1>FIX-WEB> perform a Error Clear in service mode FUNCTION>CLEAR>ERR>. Hope this helps... Daniel

The cleaning Web for the fuser has exceeded its acceptable life counter. The web needs replaced and the counter reset in service mode.Cleaning Roller Part Number- FA3-8908-000After replacement, be sure to reset the cleaning web counter in service mode under.COPIER>COUNTER>MISC>FIX-WEBTo access service mode press the asterisk ( * ) the number 2 and 8 at the same time, then the asterisk ( * ) again.