Top 20
JNC Computers SSF-33 (256 MB) MP3 Player - Page 4 Questions & Answers
My clock makes it to 7:30, won't go past then
If your clock stops at 7:30 and won't advance beyond that point, there are a few potential causes for this issue. Here are some troubleshooting steps you can take:
- Check for Obstructions:
- Inspect the clock hands and the area around them for any obstructions. Sometimes, a small piece of debris or interference can prevent the clock from moving.
- Ensure Proper Power Supply:
- If your clock is powered by batteries, make sure they are fresh and properly installed. If it's an electric clock, check that it is plugged into a working outlet.
- Check the Movement:
- The clock movement (the internal mechanism that drives the hands) might be malfunctioning. If you're comfortable, you can open the back of the clock and observe the movement. Look for any visible damage or issues.
- Inspect the Hands:
- Examine the hour and minute hands. Sometimes, the hands can get bent or caught on each other, preventing proper movement.
- Reset the Time:
- Try manually setting the clock to a different time. If it moves freely until 7:30 and then stops, there may be a specific issue related to that time setting.
- Check for Mechanical Issues:
- If the clock has a pendulum, ensure that it is swinging freely and not getting stuck. For clocks with gears and cogs, make sure they are not damaged or obstructed.
- Consult the Manufacturer or Manual:
- Refer to the clock's user manual for troubleshooting tips specific to your model. If you don't have the manual, you can often find it online on the manufacturer's website.
- Professional Repair:
- If the issue persists and you're unable to identify the problem, consider contacting a professional clock repair service. They have the expertise to diagnose and fix mechanical issues.
Remember to exercise caution when working with the internal components of a clock, especially if it involves opening the back or disassembling parts. If you're unsure or uncomfortable doing so, seeking the assistance of a professional is recommended.
How to turn off power saving mode on my sony-mhc-gzr888d
you can turn off the power saving mode by following these steps:
- Press FUNCTION repeatedly until "USB" appears in the display.
- Press OPTIONS.
- Press / > repeatedly until "PWR SAVE" appears, then press ENTER.
- Press / > repeatedly to select "OFF", then press ENTER.
The power saving mode is now turned off and the system will not enter standby mode automatically.
Cd player in my Wedge player does
Ugh! It's a bookshelf all in one unit with 3 disc tray at the top, correct? I've never had much success fixing these units, if yours plays one disc you're probably lucky it works at all.
I have a sony unit right now that hasn't cooperated much either. If you can locate the service manual for it or a similar unit you might have better luck fixing it than I've had. I usually decide to cut my losses before I get too much time into these if I can. There's a reason why they don't cost much new(compared to high end audio gear at least) & also why you can find them everywhere in non working condition...
How do i change from military time to regular time?
Just press some buttons on your Audio Player and Recorder.
If your stated 'make model (what it is)', it would help a bit!!
Or you could Google
make mode manual
or
make model change from military time.
You know that Google knows everything right?
..
Borne MP380-8BK. How to manually move files to a computer?
question edited for clarity.
question moved to MP3 Player category.
Connect to a computer using the USB cable.
Open Windows File Explorer.
In the left pane you will see the MP3 Player as a Device 'volume'.
In the right pane, drag the files to a folder somewhere else on the computer in the left pane. You can use CTRL+A for Select All to highlight all the files in the folder.
Not finding what you are looking for?
