20 Most Recent
Jolly Jumper Babys Folding Insect Tent for Protection Against Bugs & Insects - Page 3 Questions & Answers
Unscrewed and removed flush button system on Estilo cystern still can't remove lid. Squeezed only back has some give without results.
Assuming you have taken out the flush button framework from an Estilo reservoir and are experiencing issues eliminating the top, here are a few stages you can attempt:
1. Squeeze the Sides:
- As you referenced, have a go at pressing the sides of the tank close to the back. This is a typical technique for delivering the tabs or gets that safe the tank cover. Apply firm however delicate strain while pressing.
2. Lift from the Back:
- In the wake of crushing the sides, take a stab at lifting the rear of the top marginally. Now and again, there are tabs or gets at the front that might should be withdrawn first.
3. Check for Screws or Clips:
- Examine the region around the highest point of the reservoir for any screws, cuts, or different latches that may be holding the top set up. Some latrine tanks have stowed away clasp that should be relaxed or delivered.
4. Tap or Wiggle:
- Tenderly tap or squirm the top while lifting it. This can assist with releasing any close associations or gets that might be holding the top set up.
5. Inspect the Front:
- Actually look at the front of the reservoir for any apparent tabs, gets, or locking systems. On the off chance that present, you might have to press or delivery these to free the cover.
6. Refer to the Client Manual:
- Assuming you have the client manual for the Estilo storage, it might give explicit directions on the most proficient method to eliminate the top. Check for any data with respect to cover expulsion or investigating.
7. Contact the Manufacturer:
- When in doubt, consider connecting with the maker's client care for help. They might have the option to give direction or explicit guidelines in view of the model of your reservoir.
Continuously practice alert while working with plumbing installations, and on the off chance that you're uncertain about any step or experience obstruction, looking for proficient assistance is prudent. Mistaken taking care of can prompt harm or breaks in the latrine tank.
12/17/2023 11:34:58 AM •
Home
•
Answered
on Dec 17, 2023
How do I set the time/date etc on my clock? Model 65904
Ecotech solar clock
I don't have specific information about the Model 65904 Ecotech solar clock, but here are general steps you can try to set the time and date on a typical clock:
1. Locate the Time Setting Button:
- Look for a button that is labeled "Time Set" or similar. This button is often located on the back or bottom of the clock.
2. Press and Hold the Time Setting Button:
- Press and hold the "Time Set" button until the numbers on the clock display start flashing or blinking. This indicates that you are now in the time-setting mode.
3. Adjust the Time:
- Once the numbers are blinking, use the "+" or "-" buttons to adjust the hours and minutes. Some clocks may have separate buttons for hours and minutes, while others may have a single button that cycles through hours and minutes.
4. Set the Date (if applicable):
- If your clock displays the date, you may need to follow a similar process to set the date. Look for a "Date Set" button and adjust the date using the same method as adjusting the time.
5. Confirm the Settings:
- After setting the time and date, press the "Time Set" or a similar button again to confirm your settings. The blinking numbers should stop, indicating that the clock has accepted the new time and date.
6. Check for Other Settings:
- Some clocks may have additional settings, such as a 12/24-hour format or a daylight saving time (DST) adjustment. If applicable, use the appropriate buttons to configure these settings.
If these general steps don't work for your specific clock model, I recommend trying to locate the user manual or contacting the manufacturer directly for assistance. Manufacturers often provide manuals on their websites, or they may be able to assist you with setting the time and date over the phone.
12/17/2023 11:32:39 AM •
Home
•
Answered
on Dec 17, 2023
Ken-Tech Clock. How to switch regular time to military time on it please?
Question edited for clarity.
Question moved to Clocks - Home.
There are about 6 different models, but it is this one....
T-4652-manual
MANUAL TIME SETTING Press and hold the SET key for 2 seconds. The display will show progressively: 12/24 time format. Toggle to the form desired with the UP and DOWN buttons. HOURS digits will flash progressively if you press the SET button again. ... T-4652-manual.jpg Created Date: 3/31/2021 3:06:23 PM ...
MANUAL TIME SETTING Press and hold the SET key for 2 seconds. The display will show progressively: 12/24 time format. ...
Created Date: 3/31/2021 3 .
..
12/8/2023 12:28:31 AM •
Home
•
Answered
on Dec 08, 2023
How do I set time for westclox LED alarm model 70012
I pressed ******* the time button and hit the minute button as you suggested. It worked!!!! Thank you! I have an old clock that belonged to my dad from a very, very long time ago.
11/17/2023 12:11:28 AM •
Home
•
Answered
on Nov 17, 2023
Hydramax fixed shower keeps dripping,
I have a Hydramax that keeps dripping when turned off. Replacing all the O-rings in the cartridge brought things to as new. The small O-ring on the end of the cartridge spindle was the culprit.
11/15/2023 11:47:52 PM •
Home
•
Answered
on Nov 15, 2023
What do you do first in a bathroom remodel?
first of all you need to make a plain of where you want bath or shower, sink,toilet and any vanity cubbards,and radiators to be placed, then you need to make sure all walls are square (wich might mean plastering) floors are sound (no movement), and work out the cost before you start, all the best.
11/13/2023 5:59:00 PM •
Home
•
Answered
on Nov 13, 2023
Replaced batteries and clock still no show ?
Battery not in the correct polarity?
Batteries not new?
Google
make model buy a new one
make model repair centre
'make model (what it is)' in all questions please, first 3 words
...
11/10/2023 9:19:58 PM •
Home
•
Answered
on Nov 10, 2023
Not finding what you are looking for?