20 Most Recent JVC AM FM CD DET FACE CAR STEREO - Page 2 Questions & Answers

Did you verify it has 12 volts on it's main power wire? Make sure the ground connection is good?

What model is it? A problem with most JVC mechanism's are that they become mis aligned and therefore hold your discs inside. FixMyRadio .net

Turn radio off Push and hold the eject button Turn radio on while holding the eject button.
This is the force eject sequence

images for 1989 oldsmobile cutlass ciera radio wiringReport images

Check your speakers and speaker wires to make sure there are no shorts or grounds. If the speakers and speaker wires check out, you probably have a bad internal output ic.

The instruction book can be downloaded from books.jvc.com.

What model JVC stereo?

I solved it thanks. Push the reset button behind the faceplae with a pin or toothpick, hold for few seconds and it resets.

If you have a JVC in your car now, you will need the extraction keys that were given with the radio. (thin sheet metal keys) that allow radio to be removed. They can be purchased by calling JVC once you know model or reach out to installer who might have them available.

bad connection in one of the speaker wire.

Instructions

1. • 1Remove the faceplate around your stereo. Slip a flat object under the edge and gently pry it up. A flat-head screwdriver works well. There will be clips holding the faceplate in place, so feel for them. You may need to move your faceplate up or down to slide it out of position.
   • 2 Find and remove any screws holding the stereo in place.
   • 3 Slide the stereo component out far enough to see the label on top of the stereo. Write down the model and serial numbers of your car stereo component.
   • 4 Locate your VIN number at the base of the front window, driver side. If you can't read your VIN off the window, you will have it on your proof of insurance and title as well. Write it down.
   • 5 Locate your car manufacturer's toll-free Customer Service number and call them. Click on the link in the Resource section of this article and find your car manufacturer's toll-free number.
   • 6 Call the number and let customer service know you need your stereo code and have the vehicle's VIN number, as well as the model and serial numbers off the stereo. They will provide you with the code. If you are unsure how to input the code, be sure to ask for support at this time.

when i go to connect my power supply nothing happens the jvc will not turn on, but when i connect my old pioneer it works, what is going on?

Are you a technical person? If so, reply. Otherwise it is advisable to take it to a service center.

samsung tv go in to tools on remote

The best advice for a quick solution is for you to look at your fuse box. It should indicate right there what fuse is for the radio. If not, look at all of the fuses and replace the one that is blown.