Top 20 LeapFrog My Pal Violet Questions & Answers


I put in a new set of batteries and the data synced/downloaded to scout.

LeapFrog My Pal... | 683 views | 1 helpful votes


One thing to check, especially if you are replacing batteries, is for corrosion on the terminals. I just replaced batteries in my daughter's Violet, and it wasn't working. When I looked closer, I found a couple of the terminal contacts had corrosion (looks like rust). I took a few Q-Tips with some white vinegar to clean them up until I could see metal on the contacts again. After putting the batteries back in, it worked fine.

LeapFrog My Pal... | 301 views | 0 helpful votes


Our violet was doing the same thing, as though the on/off paw was pressing all the time. I have just replaced the batteries, and it seems to have fixed it. In one of the manuals I read it says if she is behaving erratically, then replace the batteries, and that the included batteries are for display only. We only had her a month!

LeapFrog My Pal... | 386 views | 4 helpful votes


My experience is that after charging for some tens of minutes it will start. But I seem to be unable to charge the battery enough to have it work for long.

LeapFrog My Pal... | 531 views | 0 helpful votes


Here you are. It took a while to find the instructions!

In addition, if you would like to delete the data on your device prior to recycling, open the LeapFrog Connect program, sync your device via USB to your computer, click on the product you would like to reset from the "My Products" screen, then under "Settings," select "Reset". If you have not downloaded LeapFrog Connect, please follow these instructions to do so.


eWaste

LeapFrog My Pal... | 9,617 views | 0 helpful votes


We have a Violet and she in need of a bath. I took the voice box out of her and
found that her wires are not removable from the voice box. You have two
choices here. Rent/buy a steam cleaner or buy a new one and program it. I am
very frugal and will resort to rebuilding something myself if I can save a buck.
Short of getting a sodering iron involed (which I might do) those are your only
options.

LeapFrog My Pal... | 1,345 views | 2 helpful votes


You have to download the software for your computer that allows you to connect Violet in order to change the name, etc. Once you do that, connect Violet with the cable included and follow the steps. If you need more help let me know. It's a little tricky sometimes if you don't do things in the precise order.

LeapFrog My Pal... | 753 views | 0 helpful votes


This might be a dumb question, but does it need new batteries?

LeapFrog My Pal... | 412 views | 0 helpful votes


Artesunate 50mg artesunate 50mg dosage, artesunate 50 mg price

LeapFrog Toys | 476 views | 0 helpful votes


All parents are like to reduce the work load of their children. And here is the best essay writing service to reduce the work load for writing essay. And this dissertation writing services always ensures the best quality content and uniqueness of content.

LeapFrog Toys | 637 views | 0 helpful votes


the pen wouldn't launch from app on the desktop or turn on manually for me either, You need to launch it through their website, it's a rollover button top right on the website page 'Launch Leapfrog Connect' the pen then auto turns itself on!

LeapFrog Toys | 18,722 views | 6 helpful votes


Try pressing the on/off button to turn it off. I had a same problem. I depressed the on/off button for ~6 second or so and the device turned off. When I turned on again, the LeapReader no longer had a white light and was recognized by my computer.

LeapFrog Toys | 527 views | 0 helpful votes


During a normal shut down, the screen image on a LeapPad will reduce to a white dot, which will disappear in five to ten seconds.
In rare circumstances, the white dot will not disappear and the LeapPad will not fully power down. If the LeapPad does not complete the shutdown process and the white dot remains on the screen for more than ten seconds, complete the shut down by pressing and holding the power button on the LeapPad for ten seconds. This will fully power the LeapPad down, and it will start up normally next time you power it on. For more information contact essay writing service reviews
Essaypaperreviews com Best Writing Services Reviews online

LeapFrog Toys | 639 views | 0 helpful votes


Have the battery checked first as it may not be connected properly or may be no good and not accepting a charge IF you run the machine off the adaptor it probably will not be charging the battery so I suggest you plug in the adaptor and leave the machine off for a few hours to see if the battery will charge.

LeapFrog Toys | 164 views | 0 helpful votes


SolutionIf your Leapster system does not respond to the stylus pen, it needs to be calibrated. To calibrate your Leapster system:
  1. Turn the unit on and wait for the sign-in screen to appear.
  2. Hold down the Home, Hint, and B buttons simultaneously.
  3. When the screen changes, press the A button.
  4. Using the Stylus, touch the center of the targets.

LeapFrog Toys | 1,515 views | 2 helpful votes


my leap pad ultra is at that part of turning off wher their is only a dot of wite left on the screen.it is still doing that and it has been at least 2 hours since i played it. it wont turn on either now.i am a kid sorry if their are spelling errors

LeapFrog Toys | 3,253 views | 0 helpful votes

Not finding what you are looking for?
LeapFrog My Pal Violet Logo

46 questions posted

Ask a Question

Usually answered in minutes!

Top LeapFrog Toys Experts

Nikki  Mclean
Nikki Mclean

Level 2 Expert

289 Answers

pramey3

Level 1 Expert

22 Answers

Keith Koene

Level 2 Expert

62 Answers

Are you a LeapFrog Toy Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

LeapFrog Toys

  • LeapFrog Toys

Most Popular Question

violet stop barking

  • Toys
Loading...