Top 20 Casio Wave Ceptor WV57HA-1AV Wrist Watch Questions & Answers

if you like watch , maybe you can try apple watch Amazon com YELLWWORS 2 Pack 10ft Extra Long Denim braided Charging Cable...

I take mine to a watch dealer to get the right, freshest battery from someone with the right tools to install it. Peace of mind.

The Casio wave scepter watches often got put on sale because the booklet was thick and the sales staff inside their steel shell stores could never prove how it worked. I bought 3 from Sears at a low price. Ok, I am in northern ontario, and I set the watch around a non metal tube or box - like a paper towel roll or small pop bottle and set it on a south or west facing window ledge. Works best on a top floor. Position the watch so the 12 is pointing to Fort collins. My casio at this distance doesn't pick up the radio signal until sometime between midnight and 6 am. It has a setting that reveals if it did sync and reset the time, and will show at what time it sync'ed. casio watch manuals are available online. As long as you have set what time zone you are in, it will set the time.

Read the manual that came with the watch. The battery could be too low. Try it in complete darkness (closet) and see if there is any glow at all. Make sure you are pressing the correct button.

I have a number of these Casio and Citizen watches. This watch does not use GPS for the time keeping. It uses a land based broadcast time signal. There is public information about where the signals come from for your area. The technical breakdown of the time code signal is public access information. The instruction manual of the watch has the information about when your watch should automatically receive the time signal, and how to set up the watch. Many of the manuals also included a map showing the time signal coverage, and includes the time of day information to show when the signal is strongest. Make sure the watch settings are for your time zone. This is important. If the main time zone is not for your area it will be trying to receive the signal at the wrong frequency at the wrong time of day. There are areas where the signal may not be able to be received. You can get the mapping for this from the service that the watch has been set to use. In North America the auto time receive is supposed to take place between midnight 00:00 to 04:00. In the eastern part of North America the reception is poor compared to central and western part of North America. Check the instruction manual for your watch for details. Below is the spec listing of your watch.

• Atomic Timekeeping Receives time calibration radio signals which keep the displayed time accurate Auto receive function (3 times per day) Manual receive function Signal: WWVB, UK MSF Frequency: 60kHz
• 50M Water Resistant
• EL Backlight with Afterglow
• World Time 29 times zones (30 cities), city code display, daylight saving auto/on/off
• Date Alert Display flashes when set date is reached
• 4 Daily Alarms and 1 Snooze Alarm
• 1/100 second digital stopwatch Measuring capacity: 99:59'59.99" Measuring modes: Elapsed time, lap time, split time, 1st-2nd place times
• Hourly Time Signal
• Auto Calendar (pre-programmed until the year 2039)
• 12/24 Hour Formats
• Accuracy: +/-20 seconds per month (with no signal calibration)
• Battery CR1620
• Approx. battery life: 2 years
• Module 2556

Size of case / total weight WV57 47.0 x 39.0 x 12.5mm / 44g WV57HD 47.0 x 39.0 x 12.5mm / 89g

(1) http://forums.watchuseek.com/f43/how-change-battery-baby-g-19677.html (2) http://forums.watchuseek.com/f43/how-change-battery-g-shock-19704.html (3) http://forums.watchuseek.com/f43/how-change-g-shock-battery-addendum-special-models-20217.html...

Try this:- First set the watch to 24 hour format rather than 12 hour format.

GO to this link below http://support.casio.com/en/manual/manuallist.php?cid=009

If you are in the US or Canada the signal is coming from Fort-Collins, Colorado. If you are too far or there are atmospheric perturbations along the way, at the times the watch is in automatic receive , the watch may not receive a strong enough signal to synchronize itself with the atomic clock signal. The watch is not always able to do so.Read the manual where it is suggested that you put the watch on a window sill, the dial facing outward with 12 at the bottom. Do not move the watch when it is trying to receive a signal. If you have a signal strength meter, orient the watch so that the signal is as high as possible.

I think you have the wrong time zone selected. Some zones are 30 min. off the rest. just in case Instruction book page E-23. To turn auto receive on or off. In Timekeeping mode press D (Lower right) to display last Signal screen. It should say GET at the bottom and show the last time it updated. (Or ERR) Hold down A until the receiving indicator and current auto receive setting (ON or OFF) start to flash. Press D to toggle auto receive on. A again to end. If you tried to make it receive manually this will be turned off. If the GET screen said ERR then it did not update and auto receive would still be off. I had to do the manual thing about 20 times before it updated. A upper left C lower left D lower right A upper right (light)

Instruction book page E-23. To turn auto receive on or off. In Timekeeping mode press D (Lower right) to display last Signal screen. It should say GET at the bottom and show the last time it updated. (Or ERR) Hold down A until the receiving indicator and current auto receive setting (ON or OFF) start to flash. Press D to toggle auto receive on. A again to end. If you tried to make it receive manually this will be turned off. If the GET screen said ERR then it did not update and auto receive would still be off. I had to do the manual thing about 20 times before it updated. A upper left C lower left D lower right A upper right (light)

I found a company in the u.k. www.watchbattery.co.uk, good price on Casio bands, pretty good shipping charges too.

click this link for the manualhttp://ftp.casio.co.jp/pub/world_manual/wat/en/qw2556.pdf

Hi,you need to look at the user manual that you can download a soft version of the user manual on below link. .when you open the link just write the 4 digits code on the back side and click searched on the URL below
Hope this helps! Take care and please Remember to rate/vote and give me 4 Thumbs Up for me to continue for Helping out the Community :) Thanks***************************CASIO Watch User Manual Archives http://world.casio.com/wat/download/en/manual/Use this page to download a copy of CASIO watch manuals in PDF format. To download a PDF file, enter the four-digit (or three-digit) module number marked on the back cover of your watch.

I think this operation guide for your watch will be at help

http://wrzuta.hihawa.pl/casio/wvq570dbe.pdf

Regards

Hi,
you need to look at the user manual that you can download a soft version of the user manual on below link. .when you open the link just write the 4 digits code on the back side and click searched on the URL below

Hope this helps! Take care and please Remember to rate/vote and
give me 4 Thumbs Up for me to continue for Helping out the Community :)
Thanks
***************************
CASIO Watch User Manual Archives
http://world.casio.com/wat/download/en/manual/
Use this page to download a copy of CASIO watch manuals in PDF format.
To download a PDF file, enter the four-digit (or three-digit) module number marked on the back cover of your watch.

It is set on daylight saving mode, english summer one hour forward.

This same problem (watch resetting to 1/1/205) has happened to me 2x now, about 2 months or so apart. I have had this watch for ~10+ years now, and works perfectly. I have replaced the battery 2x. Again, the watch works great. I just realized that in the .pdf manual, there is no indication for a "low-battery" condition. I am guessing that the "low-battery" is what is causing the watch to reset the date/time to 1/1/2005. Any others having this same problem if this watch resetting to 1/1/2005 after the watch has run just great (auto time syncing, etc.)? This watch Keeps great time! Buster Brown

Hi,
it is a complicated issue and you need to look at the user manual.
just write the code on the back side and click searched on the URL below which you can also
download a soft version of the user manual .

Hope this helps! Take care and please Remember to rate/vote and
give me 4 Thumbs Up for me to continue for Helping out the Community :)
Thanks
***************************
CASIO Watch User Manual Archives
http://world.casio.com/wat/download/en/manual/
Use this page to download a copy of CASIO watch manuals in PDF format.
To download a PDF file, enter the four-digit (or three-digit) module number marked on the back cover of your watch.