20 Most Recent
Casio Wave Ceptor WV57HA-1AV Wrist Watch - Page 5 Questions & Answers
I have this watch and
Try pressing the "mode" button until you reach the alarm settings and use the button at 2 or 4 O'clock to turn the alarm off.
If this does not work, go to the casio web site.
Go to the casio web site "casio.com".
Select "support" and the "manuals",
watches;
Accept terms
Select "watch manual archive"
Read the number of the back of your watch and enter it into the search box
Bought a Wave Receptor. Cannot
Hi, adjusting the Home Positions
If the time and date settings are wrong even after the time calibration signal is
received normally, use the following procedure to adjust their home positions.
To adjust the home positions
1. While in the Timekeeping Mode, hold down A and B
for about five seconds.
• The analog hands do not keep time during home
position adjustment.
2. Check the position of the second hand.
• The second hand home position is correct if it is
pointing at 12 o'clock.
• If the second hand is not pointing at 12 o'clock, it
means that its home position is off. If this happens,
press A to move the second hand clockwise in onesecond
steps, until it points at 12 o'clock.
• Holding down A for more than two seconds causes
the hands to move at high speed. Pressing A again
stops the hands.
' ' ' ' '' ' ' ' ' ' ' ' ' ' '' ''
12 o'clock
Correct second hand
home position
3. Press B to advance to hour and minute hand home
position adjustment.
• If current hour and minute hand alignment is correct,
they will both move to 12 o'clock.
4. Check the position of the hour and minute hands.
• If the hour and minute hands are not pointing at 12
o'clock, it means that their home position is off. If this
happens, press A to move the hour and minute
hands clockwise in 20-second steps, until they point
at 12 o'clock.
• Holding down A for more than two seconds causes
the hands to move at high speed. Pressing A again
stops the hands.
5. Pressing B exits the home position adjustment mode
and enters the Timekeeping Mode.
Hi,
My name
you can get
instructions from the Casio web site.
Go to the casio web site "casio.com".
Select "support" and the "manuals",
watches;
Accept terms
Select "watch manual archive"
Read the number of the back of your watch and enter it into the search box
How do I set the Time
If you haven't got instructions on how to do this, you can get
instructions from the Casio web site.
Go to the casio web site "casio.com".
Select "support" and the "manuals",
watches;
Accept terms
Select "watch manual archive"
Read the number of the back of your watch and enter it into the search box
Casio Lineage Waveceptor Smart Solar
This sounds like you're getting WWV signals from other time zones, and I'm not sure there's anything that can be done about it, shy of someone turning the sensitivity control down, and that would take a pretty savvy guy.
You might call around to local watch repair shops and see what they think. They're the guys that have the experience, and may know of a fix.
If they have no ideas about what's going on, contact Casio and see what they can offer for support. Here's their support site:
http://www.casio.com/support/
Good luck, and hope this helps.
Not finding what you are looking for?