Jack Lalanne s PJEBFR Refurbished Power Juicer Express, Black T - Page 8 - Answered Questions & Fixed issues

Online or at a specialist parts store

try currys partmasterif you are in the uk, they carry pars for more than what they stock

Put three drops of dish soap in it and add water .... put it on the juicer and run for 30 seconds. Empty soapy water add plain water do it again, and just for good luck.... do it one more time to get rid of all the soap.

I bought one without a manual today for 2 dollars at a yard sale , blades lock in about a half inch - turn counter clockwise to remove, may need to press down or press button in back. base below comes off too for cleaning - turn clockwise. They may come off hard the first time. the button in the back may help releasing both. Make sure to unplug first. I don't have a manual either, just some mechanical sense.

The manufacturer, your lawyer, maybe even your local tv news

Return it to the store for replacement

You may download a copy of the manual at http://data.manualslib.com/pdf2/28/2788/278727-hamilton_beach/67150.pdf?f15651116cfe4254929b4e9a98961728

That really doesn't help out at all give me a Manufacture Name and the Model Number of that juicer normally you can find it on the bottom or the side of the juicer.

safety bar is not fully engaged

Try to locate a place that sells them and/or the manufacturer.

A little lemon juice will keep them from turning brown. If you don't care about brown, don't bother.

They are available through the manufacture. Just call customer service

Google it. I find PDF manuals for items all the time via the web.

micro switch lever might be broken might want to post on youtube.com check video's

Hello, What is the make and model of the device?

Hello, What is the make and model of the juicer? Have you tryed calling the cust support for the manufacturer of the juicer?

Wholistic Research company may be able to help, they sell juicers and are very knowledgeable

Couple of things to look at 1 check the grating blade. Maybe clogged therefore need cleaning or need replacing due to bluntness 2 motor may be slipping true to overload. Place fruit in a little at a time hope this helps

were is the battery charger located

Make sure all parts are properly assembled AND tight. Hold power cord up and down at base of juicer when turning on, this will tell you if you have a short in your wire. If yes, replace the wire.