20 Most Recent JVC XL-R5010 4-Disc CD Recorder - Page 3 Questions & Answers

Try eBay. Genuine Original OEM JVC RM SR707U Stereo Receiver Remote Control for RX... This may work, not sure! JVC RM SR503U STEREO RECEIVER REMOTE ORIGINAL RX 503 Maybe this one. JVC RM SR509U Receiver Remote Control For RX 508V RX 509V Very Nice

depends on model some dont have a jack

Aux is not a headphone output, it is for another amplifier.

From memory, no pun intended, there is a large value capacitor or a battery type BN-V416 that holds the memory settings. A service engineer should be able to help.

take the PDF to any town copy centers the will print it for you or buy your own printer or as a buddy to barrow one. this post is how to print a PDF google that see 100million answers, all correct. for 4 decades now.

english only please.

Service Manual only! https://www.google.com/search?q=JVC+RX+817+owner+manual ..

Unless you are an electronics engineer, it is unlikely you can fix. Look on the back for a fuse holder. If there is check it with a multimeter. It may be protecting the audio parts. Make sure you don't have a button press for a different audio source than what you think and also check if you have switchable speaker outputs. Finally make sure the speakers are connected and the dog hasn't pulled them out. Service Manual https://www.audioservicemanuals.com/j/jvc/jvc-rx/261782-jvc-rx-817-vtn-service-manual Strangely there are far more Service Manuals and no Owner Manual!! https://www.google.com/search?q=JVC+RX+817+owner+manual ..

try another disc, Personally I would return it, check shipping costs.

You can only preset stations one by one. First, you can do a full scan for all stations in range. Press and hold the Stop button on the unit. Press Play/Pause to start the scan. (There are alternate methods using the remote control. See page 17 of the manual.) Press Fast Forward or Fast Reverse on the unit to navigate through the stations that have signal. To set a preset, tune in a station using the Tune+/Tune- buttons on the remote or Fast Forward/Fast Reverse. Then press and hold Prog/Preset on the remote. When you see ##Empty or a preset number, use Tune+/Tune- to select one of the 20 preset storage numbers. Press OK/Play/Pause to save the preset. (If using the buttons on the unit, press Fast Forward/Fast Reverse to select a preset location. Press Play/Pause to save. You will see Stored on the display in either case, if you successfully saved the frequency to the location. ManualsLib has the manual for the JVC UX-S327B here: https://www.manualslib.com/manual/1939546/Jvc-Ux-D327b.html#product-UX-D327B . See page 18 for presetting stations. I hope this helps. Cindy Wells

Hello Charles. Maybe you use the wrong pickup system. Normal Phono inputs are just for MM-Systems. MC-System needs other Pre-Amp. Some newer Amps have a switch (mostly near the Phono inp.) to select MM- or MC- system. (MM means Moving Magnet-Sys. and MC is Moving Coil-Sys) Best Regrets Gue.

Most platters and turntables use a friction fitting. Basically It's pushed on. The centre spindle has a slight taper on it so the platter grips tighter the farther down you push it. Lift the lid out of the way, off altogether if you can. Get a helper to hold down the body of the turntable with one hand and push their thumb of the other hand down on the tip of centre spindle. While they do this you grip the outside edges of the platter on opposite sides and firmly pull UP. **Caution** The platter might let go suddenly so warn your helper AND be ready for it.

That label on the lower right of your photo shows the polarity connections. It looks like the (+) is on the inner connector and the (-) is on the outer or shell. You need a 12 volt power supply of at least 1 amp rating. You can buy a power supply from radio shack that will have different plugs so you can choose the one that fits. Just make sure the polarity is set correctly. If your not sure bring the turntable into radio shack and ask him for a power supply for it.

they are not locked https://www.manualslib.com/manual/83935/Jvc-Th-A35.html

Q9504 EN Q9510 NAKIJKEN

Repair the damaged internal electronics and it will work again.

I'm from Zambia I need your help my jvc Dx u10 the volume is cutting and when it cuts on the desplay it's showing headphones out

Dont charge with the Laptop. always use separate 5v USB charger like the one you have for the phones normally to charge the device

Hello sir, You can find service manual on manualscenter.com. Just google it for "JVC RC-828W " service manual. The service manual contain the schematic. I hope to be usefull.