Polycom SoundPoint Pro SE-225 - Answered Questions & Fixed issues


Hilsu198,

Have you tried restoring the unit back to the default setting? If not, please follow the steps below.

1. While viewing a line settings status, press SELECT to view the line settings options for that line.

2. Scroll down to RESTORE DEFAULT LINE SETTINGS?

3. Press SELECT again.

4. If you are sure you wish to restore all line settings, press SELECT again.

Hope it helps.

Thank you for using FixYa.

Polycom... | Answered on Aug 23, 2011 | 88 views


I have a polycom soundpoint pro SE-225. when i either pick up the hand set to make a call OR press the speaker button to make a call i get a dial tone for a few seconds, then the dial tone jumps up and gets real loud for a few seconds and then goes completely away and will not let me make any calls. Any ideas what the heck is wrong??

Polycom... | Answered on Apr 21, 2011 | 332 views


I'm assuming you already have a voip account set up. sounds like you've not set the dtmf tones to the correct setting, usually set to rfc2833 and/or sip info - set in audio to no.

Polycom... | Answered on Apr 14, 2011 | 285 views


The 225 is full Duplex and I can't see any reason why it should not work. I can only suggest menu, system settings. restore default, and see if that changes anything.
What exactly is happening when you do a conference call?
Procom have a support section
manual here
http://support.polycom.com/PolycomService/support/cn/support/voice/soundpoint/soundpoint_pro_se225.html
support here
http://support.polycom.com/PolycomService/support/us/support/Contact_Us.html
worth sending them the question they can only refuse to answer or try to charge you!

Polycom... | Answered on Feb 02, 2011 | 197 views


Follow these steps :
1.1
Press the function (FCN) button on the handset while on a call and then press the number "2" button. This will place the call on hold and you will hear a dial tone.
2.2
Call the number or extension of which you want to transfer the call.
3.3
Push the FCN button on the keypad and then the number "2" button and immediately transfer the call. You do not need to wait for the other party to answer.

Polycom... | Answered on Oct 29, 2010 | 245 views


The handset cord needs replacing.
(The thin coiled cable that connects the hand set to the base).

Polycom... | Answered on Sep 28, 2009 | 171 views


Voicemail systems are a function of the PBX that the phone is connected to, not the phone itself. If you do not have administrative access to the PBX, there is no way to reset the password from the phone unless you know what the password currently is. What kind of premise PBX or hosted PBX service is the phone connecting to?

Polycom... | Answered on Jan 02, 2015 | 277 views


Without knowing what phone .... I would say "Press DND" again

Polycom... | Answered on Oct 20, 2014 | 123 views


Transmission circuit is responsive, however the speaker seems to be defective or the receiver section has failed. This is an internal function whereby the unit requires inspection by a technician to correct the issue at hand.

Polycom... | Answered on Feb 26, 2014 | 68 views


If you know how eo access your configuration control panel then assign a Static IP address or place that assigned address on the other side of the firewall (DMZ). Steve Medley

Polycom... | Answered on Nov 07, 2008 | 137 views


This depends where you bought it from, and what country you are in (as well as how long you have had the product). Return policies are determined by the policy of the seller, these may specify a time limit on returns, whether you can return an item that is used, and who pays for the return shipping if any. Contact your seller to find out the policies. If you purchased from Amazon, it depends whether the item was sold or fulfilled by Amazon, or sold by a third party "Marketplace" seller. Read the Amazon policies and the policies of the seller. You may also have rights of return depending on the country you purchased it in. Without knowing the make and model of the product or the seller, that's the best we can do.

Computers &... | Answered 6 hours ago | 13 views


454 YES FEEL FREE TO CALL THIS NUMBER AS IT IS A DIRECT LINE RIGHT TO GOOD OLD INDIA LOL

Computers &... | Answered 13 hours ago | 12 views


LOSERS LINE HERE YES FEEL FREE TO CALL THIS NUMBER AS IT IS A DIRECT LINE RIGHT TO GOOD OLD INDIA LOL

Computers &... | Answered 13 hours ago | 12 views


could be a safety issue to stop you gambling away all of your cash or the prepaid credit has run out and you have been gambling on credit

Computers &... | Answered 14 hours ago | 86 views


hi i was facing problem same from 3 days but i have searched google but not any provide solution there suddenly i saw a website and clink the site and get the more information all windows problem solve just a few minute https://www.epsonprintersupport247.com/printer-not-activated-error-code-30/

Computers &... | Answered 15 hours ago | 12 views


If its simply images, I'd just use a delicate material and just wipe, but fingerprints unless there incredibly bad should not quit a disc from working cd duplication company

Computers &... | Answered 16 hours ago | 253 views


how to unlock haier m150

Computers &... | Answered 18 hours ago | 381 views


Go to Filehippo.om, download and install

1) Adobe Flashplayer
2) Adobe Shockwave player
3) VLC Media player.

You should then have all the codecs you need to play anything.

Computers &... | Answered Yesterday | 53 views

Not finding what you are looking for?
Polycom SoundPoint Pro SE-225 Logo

19 questions posted

Ask a Question

Usually answered in minutes!

Top Polycom Computers & Internet Experts

Darren  Means
Darren Means

Level 2 Expert

46 Answers

Tom Chichester

Level 3 Expert

54189 Answers

N8nNc

Level 2 Expert

77 Answers

Are you a Polycom Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...