Top 20
Polycom SoundPoint Pro SE-225 Questions & Answers
My phone won't let me
Hilsu198,
Have you tried restoring the unit back to the default setting? If not, please follow the steps below.
1. While viewing a line settings status, press SELECT to view the line settings options for that line.
2. Scroll down to RESTORE DEFAULT LINE SETTINGS?
3. Press SELECT again.
4. If you are sure you wish to restore all line settings, press SELECT again.
Hope it helps.
Thank you for using FixYa.
8/23/2011 2:30:20 AM •
Polycom...
•
99 views • 0 helpful votes
I get a dialling tone on my Soundpoint Pro but
I'm assuming you already have a voip account set up. sounds like you've not set the dtmf tones to the correct setting, usually set to rfc2833 and/or sip info - set in audio to no.
4/14/2011 9:09:06 AM •
Polycom...
•
297 views • 0 helpful votes
Polycom 225 SE. Can`t make
The 225 is full Duplex and I can't see any reason why it should not work. I can only suggest menu, system settings. restore default, and see if that changes anything.
What exactly is happening when you do a conference call?
Procom have a support section
manual here
http://support.polycom.com/PolycomService/support/cn/support/voice/soundpoint/soundpoint_pro_se225.html
support here
http://support.polycom.com/PolycomService/support/us/support/Contact_Us.html
worth sending them the question they can only refuse to answer or try to charge you!
2/2/2011 3:15:30 PM •
Polycom...
•
214 views • 0 helpful votes
How do I transfer a
Follow these steps :
1.1
Press the function (FCN) button on the handset while on a call and then press the number "2" button. This will place the call on hold and you will hear a dial tone.
2.2
Call the number or extension of which you want to transfer the call.
3.3
Push the FCN button on the keypad and then the number "2" button and immediately transfer the call. You do not need to wait for the other party to answer.
10/29/2010 4:33:56 PM •
Polycom...
•
271 views • 0 helpful votes
I have no dial tone on my SE225 and have tested
I have a polycom soundpoint pro SE-225. when i either pick up the hand set to make a call OR press the speaker button to make a call i get a dial tone for a few seconds, then the dial tone jumps up and gets real loud for a few seconds and then goes completely away and will not let me make any calls. Any ideas what the heck is wrong??
10/14/2009 10:59:45 AM •
Polycom...
•
371 views • 1 helpful votes
Phone is very crackly
The handset cord needs replacing.
(The thin coiled cable that connects the hand set to the base).
9/28/2009 7:03:33 PM •
Polycom...
•
189 views • 1 helpful votes
How do i reset my voice mail password
Voicemail systems are a function of the PBX that the phone is connected to, not the phone itself. If you do not have administrative access to the PBX, there is no way to reset the password from the phone unless you know what the password currently is. What kind of premise PBX or hosted PBX service is the phone connecting to?
12/18/2014 6:57:44 PM •
Polycom...
•
308 views • 0 helpful votes
Set ethernet
Transmission circuit is responsive, however the speaker seems to be defective or the receiver section has failed. This is an internal function whereby the unit requires inspection by a technician to correct the issue at hand.
2/26/2014 5:14:51 PM •
Polycom...
•
92 views • 0 helpful votes
In polycom VVX1500 ip set
Hi,
One-touch speed dial or redial is one feature of this Polycom VVX1500, and as far as I know you cannot create a list on the screen.
3/24/2010 8:21:57 AM •
Polycom...
•
79 views • 1 helpful votes
Polycom IP501 and SPA2102 Router
If you know how eo access your configuration control panel then assign a Static IP address or place that assigned address on the other side of the firewall (DMZ). Steve Medley
11/1/2008 11:45:44 PM •
Polycom...
•
159 views • 0 helpful votes
Como cancelar el winter driver
EnglishIt is a car, and cars are complexbut no car was told , maker, model , and year.we can not guess cars. post the VIN? and all that is knownname a problem what can't your car do right?name symptoms or evidence that is confusing to you.then answers can happen.onlygood luck , finding itand Mucho Gusto.my guess now is this is posted to computer forumand not to CARS !must be some odd traction controls thing'but 10,000 models of cars,
How to resolve your meter when it's on temper mode
Tamper mode means the prepaid meter is in a mode where it does not supply power. Check your meter remote controller (used for recharging units). If it displays a Relay Open symbol, the meter is in tamper mode.
To remove tamper mode requires you contact the distributing company and request a tamper reset token. The tamper reset token is a 20-digit code that clears the meter from tamper mode and restores it to its default state.
My Employer Says They Are Going To Cut My Wages. Can They?
If you are in the middle of a contract, then cutting your wages is almost certainly a violation of your employment law rights. While I am by no means an expert on this matter, I did have a similar issue years ago - mid-contract wage cuts - and I hired an
employment attorney to fight the case on my behalf. It turned out that my employer was basically looking to scare people into taking the wage cut.
They got into some pretty serious legal trouble for their transgression, and nothing happened to me in terms of wage cuts after that. If you are between contracts, your employer can re-negotiate your salary, but as far as I am aware, if you are in an agreed-upon contract, they cannot just decide to reduce your salary. If you want to settle matters, contest this action with support from a legal professional.
Not finding what you are looking for?