Top 20
JVC TH-M505 System Questions & Answers
Why wont play color
TH-M505 can display in black in white if connected iimproperly using COMPONENT connections or if cables have gone bad. Try replacing component or changing connection to COMPOSITE. Does it play in black in white using COMPOSITE?
Jvc sp-pwm303 circuit diagram required please
Hello Pete. Did you ever get a positive response to your question? I have bought the sub of one of these units, and want to work out how to turn it on and feed a signal into it. Cheers, Matthew in New Zealand
WHERE CAN I BUY A SP PWM505 CABLE THAT GOES FROM
- Here is a list of cables for your unit from Crutchfield's.
- If your looking for the s pin DIN cable from the sub you can get that anywhere. The 8 pin DIN is a standard cord the same across the board. Here are a couple to choose from.
- If you have any comments please feel free to leave them here.
- Hope this helps and thank you for using FixYa.
10/11/2011 7:22:29 PM •
JVC TH-M505...
•
1,257 views • 0 helpful votes
I CANT FIND A SP PWM505 CABLE
- Here is a list of cables for your unit from Crutchfield's.
- If your looking for the s pin DIN cable from the sub you can get that anywhere. The 8 pin DIN is a standard cord the same across the board. Here are a couple to choose from.
- If you have any comments please feel free to leave them here.
- Hope this helps and thank you for using FixYa.
Regards,
Tony
Jvc th-m505 disc changer will
There are 4 possible items that could be at fault.
LV41431-002A
LOADING BELT
VKS5557-001
LOADING GEAR
LV21406-003A
LOADING RACK
or it could be the main drive motor which I'm unsure of the Part No. for.
If you take the cover off and check that the motor is rotating and follow the belt, gear and rack from their to see which is slipping or not moving
Please leave feedback.
Cheers
Andy
Can you help please,i can,t
Sound like the tray drive belt has stretched.
You need to remove the case and then remove the cover from the DVD.
Towards the front you'll see a motor with a belt to a larger wheel.
Remove the belt, measure it and get one a couple of mm smaller.
What am i doing wrong i have picture soundduring
You need to change the surround sound settings. This is on page 29-30 in the instruction manual that comes with the sysyem. You can download a copy in pdf format here: http://resources.jvc.com/Resources/00/00/95/LVT1147-001C.pdf
Basically do this:
1. Play the dvd.
2. Select Audio mode on the remote control
3. Hit the "Surround" button repeatedly until you hear all the sounds you expect to hear.
Go slow inbetween hitting the button to make sure the sound is playing.
I have a JVC TH-M606
Hi,
Please confirm that unit gives sound output on System Connector J1103
I have schematics of this unit and can assist you to hook RCA jacks for all 5 channels output (L+R+C+SL+SR)
Thanks.
At first my disc got
It must be refffered to a service tech and not messed up as it should be seen how this was removed.So dont take chances to tamper.
Not finding what you are looking for?