20 Most Recent
JVC TH-M505 System - Page 2 Questions & Answers
Jvc sp-pwm303 circuit diagram required please
Hello Pete. Did you ever get a positive response to your question? I have bought the sub of one of these units, and want to work out how to turn it on and feed a signal into it. Cheers, Matthew in New Zealand
Sounds but no bass
Check your setting for the sub first. If that doesn't pan out it is likely to be the amp.
WHERE CAN I BUY A SP PWM505 CABLE THAT GOES FROM
- Here is a list of cables for your unit from Crutchfield's.
- If your looking for the s pin DIN cable from the sub you can get that anywhere. The 8 pin DIN is a standard cord the same across the board. Here are a couple to choose from.
- If you have any comments please feel free to leave them here.
- Hope this helps and thank you for using FixYa.
I CANT FIND A SP PWM505 CABLE
- Here is a list of cables for your unit from Crutchfield's.
- If your looking for the s pin DIN cable from the sub you can get that anywhere. The 8 pin DIN is a standard cord the same across the board. Here are a couple to choose from.
- If you have any comments please feel free to leave them here.
- Hope this helps and thank you for using FixYa.
Regards,
Tony
Jvc th-m505 disc changer will
There are 4 possible items that could be at fault.
LV41431-002A
LOADING BELT
VKS5557-001
LOADING GEAR
LV21406-003A
LOADING RACK
or it could be the main drive motor which I'm unsure of the Part No. for.
If you take the cover off and check that the motor is rotating and follow the belt, gear and rack from their to see which is slipping or not moving
Please leave feedback.
Cheers
Andy
Can you help please,i can,t
Sound like the tray drive belt has stretched.
You need to remove the case and then remove the cover from the DVD.
Towards the front you'll see a motor with a belt to a larger wheel.
Remove the belt, measure it and get one a couple of mm smaller.
Not finding what you are looking for?