Top 20
Pyramid 4000 Self Totaling Employee Time Recorder Clock Questions & Answers
Incomplete characters , the printer ribbon
If the ribbon is not completely over the print head theresulting print will show incomplete characters.
This is the only cause for this problem. But as you stated theprinter ribbon cartridge is installed correctly completely over the print headand already changed the ribbon 2 times, then I suggest you to check the printhead, and try after replacing them.
Good Luck.
What does Error 1 mean?
Error 1 - Indicates time card stuffing. If an individual tries to force a card into the unit, the 4000/4000HD will accept the card but will not print or store any payroll data. If this situation occurs, an ERROR 1 will show on the front display and the card will not be "punched".
Solution: Rerun the time card through the time recorder without pushing on the card.
Resource 1 : Owner's Manual
How do these points equate to money?
No money ever!
There is no payment made for answers on Fixya, points don't mean prizes, they are just for fun.
ADMIN Andrew
- Answers: 65,820 and not a penny per Answer.
Head over to
www.justanswer.com they pay lots of money because they charge for people to ask a question.
..
How to identify a genx scanner device for Windows 7
When you have no driver for this Windows version and the former did not work, even in compatibility mode, then try the free program IrfanView. In the File menu first go to Select scanner source. VueScan is also a program supporting many scanners but not free.
MERA WORKCENTRE 5016 U2 ERROR CODE PROBLEM
Refer to pages 92 and 98 in the manual regarding error code. Switching it off and on may help (page 32). If such does not resolve the issue, you may have to consult your system administrator or the Xerox Welcome Center. 1 (800) 835-6100
My conlog is showing minus - 11.06 kwh
You mentioned a reading of minus 11.06 kWh. Here's what it means:
Remember that this is a prepaid meter, so the negative value suggests that you've used more energy than what was prepaid
The meter has consumed 11.06 kilowatt-hours (kWh) more energy than it has generated or received.
This negative value indicates that more energy was used than supplied during the specified period.
LED Indicator:
The meter has an LED light that flashes when electricity is consumed.
When you use electricity, the meter balance decreases, and the LED light provides a visual indication of energy flow.
Not finding what you are looking for?