Xterra Fitness UB1.5 Upright Bike" - Page 7 - Answered Questions & Fixed issues

In my opinion you are wasting money for little benefit. You will not go faster with a 52 tooth, except maybe on long steep downhills, which wastes energy (remember you have to go back uphill). A 36 tooth chainring will also raise your low gear by 6%, which may make hills more difficult.

i have the same quad with the same problem,its done every experts head in,take the seat off and look down the left hand side of the inlet manifold there should be a small peice of rubber hose about an inch or so,check to see if it has a screw in it or a plug if not put a screw in it,it will then rev higher just turn the rev screw on the right of the carb outwards untill tick over is about 1700rpm

Hi, You can track it through the manufacturer which should give you the year it was made.

Being off 1/2" means less than 2 miles in every hundred, but if you want an accurate reading follow one of these videos: https://www.youtube.com/results?search_query=set+bike+computer+wheel+size

Yes, you can. It is a VDO 3009 Spare Bike Mount for M Series. You can find them on eBay, Amazon and www.rosebikes.com. Good luck.

http://www.manualsonline.com/

turn key halfway and push in on key and make sure it is all the to the right, or on.

look for serial no. under bottom bracket the then go to Nishiki24 and ask.

Look here http://www.manualsonline.com/

Check this site http://www.manualsonline.com/

Try here http://www.manualsonline.com/

This is the place http://www.manualsonline.com/

Try here http://www.manualsonline.com/

Maybe this will help http://www.manualsonline.com/

What are you using? http://www.manualsonline.com/

Maybe they have one http://www.manualsonline.com/

This site may have a manual http://www.manualsonline.com/

Check this site for a manual http://www.manualsonline.com/

http://www.manualsonline.com/