Lexar LDP-400 MP3 Player - Answered Questions & Fixed issues

Hi skidney11...


1...You must download and install Windows Media Player 11 on your computer.
NOTE...Some older MP3 players will not work with Windows Media Player 11 or Windows 7 with Windows Media Player 11.
If this happens to you, then you will have to uninstall Windows Media Player 11 and install Windows Media Player 10.
2...After you have downloaded and installed Media Player on your computer.
3...Open Media Player on your computer.
4...Install all your music into Media Player that you want to install on your MP3 player.
5...Plug in your MP3 player to the computer using your Data/Sync cord, be sure that Windows Media Player is on.
6...Media player should recognize the MP3 player and sync with it.
7...After it is sync'ed with the computer,you can add the music you have installed into Windows Media Player to your MP3 Player.
Please take time to rate me thumbs up.

its is because the drive is corrupted.. you need to format your mp3 only then you can acsess it again

The Input/Output or I/O error is usually a pretty bad error on any Disk or Flash drive! It looks that this I/O error might have corrupted your media player drive directory (commonly know as FAT table).
Confirm the problem by trying to plug your device in a different USB port on your PC/Laptop: if you are still getting the I/O error, you can try to repair your player drive by using Open Windows Explorer -> Properties -> Tools -> Error-Checking facilities.
If Error-Checking cannot repair your drive, then you will unfortunately have to re-FORMAT your device Flash drive and loose everything on that drive (hope you have a good backup on your PC/Laptop)!

It is likely that the files loaded are not true MP3, therefore the PC -which can cope with WAV and other formats will play them but the player that read only MP3 cannot. Are you sure the files loaded are truly MP3?

Formatting the Disk maybe solve it. But if the disk itself is working. Go to Start-> Run -> type "cmd" -> format F: then press "y" and another "y" if it asks you again if the system couldn't read the drive itself. Then this means that your storage on the MP3 Player (that shows as F on your computer) is now broken.

Formatting the Disk maybe solve it. But if the disk itself is working. Go to Start-> Run -> type "cmd" -> format F: then press "y" and another "y" if it asks you again if the system couldn't read the drive itself. Then this means that your storage on the MP3 Player (that shows as F on your computer) is now broken.

Formatting the Disk maybe solve it. But if the disk itself is working. Go to Start-> Run -> type "cmd" -> format F: then press "y" and another "y" if it asks you again if the system couldn't read the drive itself. Then this means that your storage on the MP3 Player (that shows as F on your computer) is now broken.

You need to change your USB Port... try the back of your computer. Or you need a firmware update.

What do you mean by not reconized? Does it still show up when you plug it in and just tell you its not reconized? or does it just not show anything at all? If it comes up then I suggest going to Lexars website and downloading the drivers for your LPD-400 so your computer will be able to interact with it...make sure its the mac drivers.

Format it,, it will work.

format your player but make a back up of your music.

Ok will thats funny.... formatt the unit by accessing it through to my computer on your desktop , right click on my comp go to manage and then go to disk management and format it. Also try different usb port.

If you've checked the cables, swapped them out, and ensured that the power adapter is providing power to the Vocalizer 3, but you're still not getting any sound output, there are a few additional troubleshooting steps you can try: 1. **Check Volume Levels**: Ensure that the volume levels on the Vocalizer 3 and any connected devices (such as mixers, amplifiers, or speakers) are turned up and not muted. 2. **Test with Different Inputs/Outputs**: Try connecting the Vocalizer 3 to different inputs on your mixer, amplifier, or speakers, and test with different output devices if possible. This can help determine if the issue is specific to certain connections or devices. 3. **Inspect Settings**: Check the settings on the Vocalizer 3 to ensure that the correct input and output sources are selected. Make sure that any settings related to mono/stereo output are configured correctly. 4. **Test with Different Power Adapter**: If you have access to another power adapter with similar specifications, try using it to power the Vocalizer 3. This can help determine if the issue is related to the power adapter. 5. **Reset the Vocalizer 3**: Some electronic devices can benefit from a reset to their factory settings. Refer to the user manual for instructions on how to perform a reset on the Vocalizer 3, and try resetting it to see if it resolves the issue. 6. **Contact Technical Support**: If you've tried the above steps and are still experiencing issues with the Vocalizer 3, it's possible that there may be a hardware problem or malfunction. Contact the manufacturer's technical support for further assistance and troubleshooting guidance. They may be able to provide additional insights or recommend repairs if necessary. By following these troubleshooting steps, you should be able to diagnose and resolve the issue with the lack of sound output from your Vocalizer 3.

1. Power Off: Turn off the device.
2. Jumper Configuration: Locate the jumper labeled "S16" on the device. Initially, it should be connected to pins 2 and 3.
3. Power On (Alarm+All LEDs Flashing): Turn the device back on. You'll see the alarm LED and all other LEDs flashing.
4. Power Off Again: Turn off the device once more.
5. Jumper Adjustment: Change the jumper configuration from pins 2 and 3 to pins 1 and 2.
6. Finished: Your Porpo YH-2000 is now set to the desired angular unit mode.

If you encounter any issues, you can press the reset switch on the back of the device to reinitialize it.

this model SA rather than SC seems to be a Middle East model. The SC version doesn't have DAB. https://www.google.com/search?q=panasonic+sa-pm250+instruction+manual ..

All questions need clear 'make model (what it is)' first 3 words. https://www.google.com/search?q=fmdott085+V398 ..

Question edited for clarity, typo and CAPS. Question moved from Cars and Trucks category. Claim on the warranty irrespective of how long you have had them. They charge $180 but they cost them $20 to buy from China. Package them up and send them tracked and ask them to replace the batteries. How long is the warranty on AfterShokz? While we hope you never need it, all new Shokz purchased from authorized retailers come with a two-year warranty that begins on your date of purchase. Jan 11, 2019

How To File A Warranty Claim For Your SHOKZ Headphones

https://www.google.com/search?q=Openfit+Shokz+battery+replacement ..

Are you using the charging cables that came with it? That is a type C. Are you securely attaching the charging cable? A loose connection would keep the battery from charging. If you had a low battery, you would see a red light. That you have no light at all suggests there is no charge left in the battery. I'm not sure the reset will work with no charge which is why you ought to check the cables first. But turn it off and then hold down the Multifunction button for 10 seconds to reset it. Then turn it back on and see what happens. If you can, test the charging cable on aother device. If you have another type C charging cable, try it, just to eliminate a bad cable. If these suggestions don't work, you may try the manufacturer's customer support.

The F2100 remote is not explicitly listed as compatible with the AerialBox T2100, I recommend using the remote that came with your AerialBox T2100 for optimal functionality. If you have any specific compatibility concerns, I suggest reaching out to Dish TV customer support for further assistance.