LG RU-52SZ51D 52" Rear Projection HDTV-Ready Television - Page 7 - Answered Questions & Fixed issues

$300.86

CHECK THE OPTICAL ENGINE. THEN AGAIN THE LG BRANDS BELONG TO GARBAGE TIP

LG  BRANDS ?  EVEN THE CHINESE BRANDS ARE BETTER THEN LG. THE RED PATCH WILL GROW WITH TIME. COST  TO FIX AROUND $ 1000 PLUS

you can't do anything about this TV. Theres no such thing as a LCD rear projection television.

Hi, go into the menu via remote control and select special in the options. select child lock and untick it if it has a tick next to it.

This should re-enable the front control panel.

Hope it helps.

Te projection light bulb has blown out they are suppose to be good for about 2000 hours and cost about 250 US dollars

This problem is usually caused by stray magnetic field,from magnetic objects (e.g Loud speakers)placed too close to your TV set. The solution to this is to place such objects away from your TV set.As you take the suspected object away the shadow may disappear,if it doesnt then it will need your TV set to cool down,by turning it OFF for sometime,may be the next morning,depending on the room temperature.If it persists it should be DEGAUSED.

You left so little information my friend, it will be impossible to help you. I did however find Magnavox home page where you can request service on your TV set. You will need to go to the link I leave you and on the right side of the page, click on request service. Then a customer service person should be able to assist you. All I can find from the info you left is that your zip is 28601. The Magnavox site should be able to help you. Good Luck, and I hope you get your set repaired. The link is http://www.usasupport.magnavox.com/productSelector.html

It is not the bulb it is the blue polarizer lens in the engine. LG has made it available and an LG authorized service center can probably replace it for you, although many are just replacing engines which will be VERY expensive. Good Luck

Sounds like it may be a bad ballast

Hi lovelace Check your power supply module it needs to be replaced.good luck

Try resetting the TV by unplugging it for 2 minutes then trying again. If it still has any problems then double check your connections to the TV.

Hold down on the Enter or OK on the TV and Mute on the remote control for 5-10 seconds. The TV should then ask what you want to do. Perform this with the TV on.

this is the engine problem cause by the blue lcd inside the engine if you can find the blue lcd you still have to do the converion. by lg technician

The input source such as the cable or satalitte signal my be a bit weak or the set may have a problem with the streo sensitivity. This is not an adjustment that a consumer can do. Have the cable checked out also. Goood Luck

Youll have to contact the manufacture on the auto reset to factory defaults man as DLP stuff is good stuff but a little technical. Sorry.

If Im not mistakin this is a DLP projection system. The problem your describing most likly is not the dlp display chip Your problem sounds like it could be a reflection problem like smoke dirt or dust on the lens or light sheld or light reflector. Im thinking could even be the lamp its self.

Question edited for clarity. It appears to be an LG rather an an IG. https://www.avforums.com/threads/lg-42lb1db-how-cani-remove-the-swivel-base.519459/ Further Help and videos https://www.google.com/search?q=lg+42lb5df+remove+base+stand ..

The screen blank out

Likely a dry connection where the HDMI socket it soldered to the board. https://www.google.com/search?q=LG+PLASMA+TV+MODEL+NO.60PS60-UA+that+is+not+picking+up+the+HDMI Old plasma technology though, time for a new one, as quality has moved on. https://reviewed.usatoday.com/televisions/content/lg-60ps60-plasma-hdtv-first-impressions-review-830 ..