Top 20 LG RU-44SZ61D 44" TV Questions & Answers

Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. http://electronicshelponline.blogspot.com/ Search the site by type in the "brand name" of your device, in the "Search box at the top right of the Homepage" to get gathered related posts.

Hi, I think your Display card not proper work so please contact LG Technician. Thanks.

HiIt seems you tv set has an overload in the output supply line which may be caused by a shorted rectifier diode or a shorted horizontal output transistor and associated circuit. The set should be serviced.Sully

The lamp might be at the end of its life. Change the lamp.

Hi:
The only way to diagnose this problem is to take the DVD out and inspect the take up rollers designed to take and eject the disc. If you hear sound when try to eject you may have a bad belt or the take up rollers are oxcided causing slipage during ejecting.

change the memory ic

Weak capacitors are a very common thing. I would suspect that is your problem. It could be in the powersupply or Signal Board or in the inverters. Check with a tech!

It is a possibility, if the indicator lights are on it definitely means something is wrong in the light engine system, it could be your lamp, ballast, color wheel or dmd board, when it comes to LGs it's most probable that your lamp might go out. You can replaced it to see if it fixes your problem, if it doesn't, there's a chance it might be yoru ballast.

This TV has no guns. It has a lamp and a color wheel.
Owner reported model number as: lg ru-44sz61d dlp. Pay particular attention to the "dlp" part.

I do not know what is causing the issue unfortunately.

Looking at the television, on the lower right hand side is the ventilation opening. Remove the screws and then remove the cover. Inside the opening is the light bulb holding bracket that has a handle on it. Disconect the power wires (2) going to the bulb, remove the 3 screws holding the metal cover over the bulb and pull it out of opening. Then remove the screws holding the light bulb in place. Very simple and easy to replace.

The blinking should be in a pattern. When the set shutsdown because of a fault, the standby light will blink a code. This code should be a number of blinks followed by a 2-3 second pause then the code again. Please post that count as that will indicate the fault that was detected. Armed with that information, we should be able to provide you with an explanation of what is wrong and possible solutions for fix it.

Thanks,
Dan

Most likely you can have 1 or 2 problems.
1! the light is busted and you will have to replace that. You might also need to check your cooler fan bearing as you indicate it makes noise.

Please open following link( you need acrobat reader)
this is the service manual for your TV

ru-44sz61d

Question edited for clarity. It appears to be an LG rather an an IG. https://www.avforums.com/threads/lg-42lb1db-how-cani-remove-the-swivel-base.519459/ Further Help and videos https://www.google.com/search?q=lg+42lb5df+remove+base+stand ..

Likely a dry connection where the HDMI socket it soldered to the board. https://www.google.com/search?q=LG+PLASMA+TV+MODEL+NO.60PS60-UA+that+is+not+picking+up+the+HDMI Old plasma technology though, time for a new one, as quality has moved on. https://reviewed.usatoday.com/televisions/content/lg-60ps60-plasma-hdtv-first-impressions-review-830 ..

Question edited for clarity and add maker. No one uses Universal Remotes these day. You buy a Remote that is a Copy of the original. https://www.fixya.com/support/r29872378-universal_remotes_no_facsimile_remote The AMELY is a very cheap and nasty Chinese Remote and they don't supply instructions!! https://www.amely.cn/AD-UL101-S-AMELY-unviersal-TV-LCD-LED-remote-control-p636185.html Codes are decided by the brand of television. This is for LG https://www.google.com/search?q=universal+remote+codes+for+lg+tv ..

Maybe the disk is not compatible with the DVD player version

You can't, the LG DVD Remote is single frequency. If you are lucky, the LG Television Remote, might control an LG DVD. If you have lost a remote, have a read of this https://www.fixya.com/support/r29872378-universal_remotes_no_facsimile_remote ..

This is the Power Board for it. check those 6 electrolytic Capacitors on the right for bulging or splitting. Don't buy it blindly, it's a guess. The output voltages with a digital multimeter. https://applianceparts.com/item/10217204/LG/EAY62812602/ Many parts are obsolete. eBay has used boards, but they are risky because they are out of scrapped sets. https://www.google.com/search?q=50PN5300-UF+power+board We have a television expert named Larry, but I haven't seen him for a while. This used to be my advice https://www.fixya.com/support/r29790007-repairing_own_television ..

If you would like to share any clues, yes. Checked power going in, I presume. Any indicator lights? If yes, how many times does it flash?