20 Most Recent Roland Boss BR-800 Digital Recorder - Page 2 Questions & Answers

most likely we dont have crystal balls --need to have diagnosed for problem

Yes, you can use the second pedal on a Roland BK-5 keyboard to transpose the key of the music that you are playing up or down by a semitone at a time. To do this, you will need to press and hold the second pedal while playing the keyboard. You can also use the transpose function in the settings menu of the BK-5 to adjust the key of the music that you are playing by a specific number of semitones.

I am also using IOS and Android. So how can I improve some features? The black screen helps you relax when using the computer too much.

Question edited for a bit more clarity. Video that might help https://www.google.com/search?q=Roland+octapad+spd30+dead Owners Manuals only. https://www.google.com/search?q=roland+octapad+spd30+service+manual ..

It's a Chinese made Roland and no service information is available as when a fault is found the main board is replaced, eliminating the need for service information. I would check that it is a stereo out jack and not mono. If it is a stereo out, check that both input phonos work. If they do, replace the faulty socket or damaged pcboard.

Sounds like a blown motherboard to me. It needs to go to the shop.

I need fantom x6 motherboard!!! My whatsapp no +91_9760504606

Hell,

there is no display on your Roland Handsonic because the screen inverter or screen board panel is faulty. This has to be replaced for you to see your digital display again.

So its either you use it like that without the display or you take it to a repairer for fixing.

Take care.

This depends entirely on what you personally define as 'Good'. The only real answer to this is try it, listen to it and decide for yourself.

https://www.google.com/search?q=Roland+rd100+sustain+pedal+replacement ..

Read this please https://www.justanswer.com/electronics/9xlyw-roland-digital-piano-kr-4500-piano-turns.html and these https://www.google.com/search?q=Roland+kr+4500+no+sound But you will probably need a service centre for replacing components.

Being mainly digital, I would reset the processor and try again.

It appears to be on their website here https://www.rolanddga.com/support/products/engraving/camm-2-pnc-2100-desktop-rotary-engraver and more https://www.google.com/search?q=software+and+driver+for+Roland+PNC+2100 ..

Open up the Roland G-70 and check if all the connectors and flatcables are well seated. Check also if the power supply is working as supposed to.

i moved you from computers to music + roland. it needs service, find a shop to fix it; IT RAN FOR 1995 TO NOW, 26YEARS FRANKLY AN AMAZING RUN. FOR SURE. it needs service, you have 2 choices besides upgrade. 1: shop fix it. 2: buy the service manual and learn electronics. check DC power rails inside first and fuses .

Do you have an owner's manual......first thing to try would be a factory reset...sometimes this will un-scramble the operating system and set it back to when it left the factory....contact Roland for an owner's manual if you don't have one....hopefully this helps..if not, then you will have to open it up.....