20 Most Recent
TP-LINK TL-WR740N 150Mbps Wireless Lite N Router IEEE 802.11n IEEE 802.11g IEEE 802.11b Built-in 4-p... (813120016543) - Page 5 Questions & Answers
I USE MIFI TP-LINK MODEM M5250..THE PROBLEM IS WHEN USE MY COMPUTER TO CONNECT TO MIFI WIFI SIGNAL ITS DOESNT HAVE ANY PROBLEM...BUT THE PROBLEM IS WHEN I TRIED TO CONNECT USING HANDSET THE WI-FI SIGN
If you don't have access to the settings the handset is using to select the security protocol, or know what they are, the issue is probably with the protocol the handset is using to connect to the wifi, Check the computer that can connect, to see which protocol it's using. Then, I'd try a support ticket with the manufacturer of the handset to see if the issue is resolvable. It really depends on how flexible the handset protocols are...None, WEP, WPA2-PSK (TKIP), WPA2-PSK (AES), and WPA2-PSK (TKIP/AES) are all different options. Choose the wrong protocol, and you can't connect.
7/3/2017 4:13:03 AM •
TP-LINK...
•
Answered
on Jul 03, 2017
Not recognize dns
Google has many different ip addresses. They have servers I guess you call them everywhere. I downloaded several apps that looked up IP addresses cause the ping had different ones I didn't use. They all led back to GooGle owning that address. Nothing to be alarmed about, theres just no escape from Google, they see everything, track everywhere, and won a lot of different IP
4/7/2017 3:43:07 AM •
TP-LINK...
•
Answered
on Apr 07, 2017
How do I create a vpn network
this document should explain what to do
http://www.tp-link.com.au/resources/document/VPN_Config_Guide.pdf
3/29/2017 5:01:08 PM •
TP-LINK...
•
Answered
on Mar 29, 2017
Error codes 17002
Reset it with the pin hole on the back or the bottom. Everything will change to factory defaults.
9/10/2016 4:42:52 PM •
TP-LINK...
•
Answered
on Sep 10, 2016
Tp link router how to hook it up
All you should need to do it plug in the Ethernet cable from your modem. Wait for your router to get an ip address then look at the available connections on your computer and click connect.
8/8/2016 11:58:43 PM •
TP-LINK...
•
Answered
on Aug 08, 2016
Recovering a dead TP-LInk Router
My router Archer C7, stop working suddenly. No flashing LEDs, cannot connect to it. Use the serial connection to the UART, and found it stops at the boot up stage, cannot find the apps to run......
Found the flash on the board, and put pressure on the flash IC. The unit comes up again and working.......
Put some flux on the flash pins, and run a hot solder across the pins. All working now.
My problem is dry joint of the flash. Others may have corrupted software and the serial connection will be a great help.
Error code 011 of adsl tp link router
1- Go to the Settings menu, then click "Network"
2- Then you need to select "repeat guided setup"
3- Select the name of your wireless network.
4- Then if prompted, enter the password ***** your wireless network. That's it!, it should work now.
for more help visit
https://cbrtechsolutions.net
10/7/2015 12:36:13 PM •
TP-LINK...
•
Answered
on Oct 07, 2015
Not finding what you are looking for?